high sensitivity 2 way dayton planars or dotd

[unknownuser]

i am planing my next project a high sensitivity 2 way bookshelf speaker for use with a low power tube amp. i am currently thinking about using the dayton planar tweeter (275-085) but am not sure about a woofer that can keep up with its 94 db. i'm thinking this will have to be a tmm possibly with the dayton 5 1/4 (295-302).
i have never used a planar before and am thinking that the stable impedence and high sensitivity will work great with a tube amp.
what do you guys think ?
i was also tossing around using the DOTD TB as it has fairly high sensitivity but i really want to play with the planars.
thanks!


(Originally posted by: jim)

[toddshore]

For what it is worth, the planar needs to be crossed high. I really don't like it lower than 3KHz with a 4th order, though it can be pushed down to 2.5KHz.

[unknownuser]

> For what it is worth, the planar needs to be
> crossed high. I really don't like it lower
> than 3KHz with a 4th order, though it can be
> pushed down to 2.5KHz.
perhaps the tang band w6 might be a good mate 264-852 ? high sensitivity and high end extension


(Originally posted by: jim)