Help me spend $100

[unknownuser]

Hi there,

I won theNoid's last raffle for $100, to be spent at one of the online DIY vendors. As I recently purchased parts to complete about 5 projects currently on the go so I guess this will have to go to something new.

Here's what should be finishing up in the upcoming months:

Truine CC
Gainclone - LM3875
Measurement mic and preamp (ESP design)
2.5 ways towers using Vifa tweeter and buyout 6.5" woofers from PSB (made by Vifa)
Wayne's D2s (for a friend)

At this point, I'm leaning towards some of the RS drivers but I know I won't be using them for a long time. My sub (DPL12) could use a few extra watts as well, but that would blow the $100 budget.

Any other ideas or suggestions?

duane


(Originally posted by: duanep)

[dlsbobby]

> Hi there,

> I won theNoid's last raffle for $100, to be
> spent at one of the online DIY vendors. As I
> recently purchased parts to complete about 5
> projects currently on the go so I guess this
> will have to go to something new.

> Here's what should be finishing up in the
> upcoming months:

> Truine CC
> Gainclone - LM3875
> Measurement mic and preamp (ESP design)
> 2.5 ways towers using Vifa tweeter and
> buyout 6.5" woofers from PSB (made by
> Vifa)
> Wayne's D2s (for a friend)

> At this point, I'm leaning towards some of
> the RS drivers but I know I won't be using
> them for a long time. My sub (DPL12) could
> use a few extra watts as well, but that
> would blow the $100 budget.

> Any other ideas or suggestions?

> duane

That way you could wind your own inductors and measure them. Plus check you caps to see how far off they are. Robert.