Anyone buy the DOTW?

[paul_n_oneal]

Nick sent me two for a secret entry into the DIY Iowa event. Time is short but I think I can come up with something. Not going to tell you what the other drivers are at this time. Must have a little surprise afterall. So who besides Nick goes to the Iowa DIY event? I know I know some of you .

Paul

[shawn_a]

I popped into the 'Boro on Saturday and picked up a pair of them. I didn't run a frequency sweep on them yet (got busy sighting in the pellet gun hehehe) but I did run them on the WT2. Pretty close to one another and the published specs. Should be a pretty solid performer in the bass department.

shawn

[paul_n_oneal]

I used your TS measurments for box modeling. I just took the average of the two. Be interesting if you get a chance to do the other test. Guess I'll go cut some MDF after work when it starts to cool down. 106 heat index isn't fun .

Paul

[shawn_a]

> I used your TS measurments for box modeling.
> I just took the average of the two. Be
> interesting if you get a chance to do the
> other test. Guess I'll go cut some MDF after
> work when it starts to cool down. 106 heat
> index isn't fun .

> Paul

Actually if you model both of my drivers simultaneously, the curves will just about be a perfect overlay of one another. At least that's what I was seeing in WinISD. I was expecting the measurements to be pretty close to one another and I wasn't disappointed. I have to get on the ball and get another project done before the Dayton event so I might not get to the frequency measurements this weekend. It's going to be a busy one seeing how it's the holiday anyhow.

shawn

[paul_n_oneal]

> Actually if you model both of my drivers
> simultaneously, the curves will just about
> be a perfect overlay of one another. At
> least that's what I was seeing in WinISD. I
> was expecting the measurements to be pretty
> close to one another and I wasn't
> disappointed. I have to get on the ball and
> get another project done before the Dayton
> event so I might not get to the frequency
> measurements this weekend. It's going to be
> a busy one seeing how it's the holiday
> anyhow.

> shawn

Hey, that's cool. I'll have to meas. them anyway. Think I'll meas. the TS params to see if mine match closely too. I always forget how much a quarter weights though. I need to put that on my website for reference. Any idea how much coins weigh? I'll also post this design on my web page for others to use. I was bored and Nick gave me a chance to keep myself occupied so I am grateful as I'm sure he is too.

Paul

[jtaylor]

Paul:

What is the URl or link to your web page again. I thought I saved it, but I couldn't find it in my fav's. TIA

Jack Taylor

[paul_n_oneal]

Provided Link: Paul O'Neal Home Page


> Paul:

> What is the URl or link to your web page
> again. I thought I saved it, but I couldn't
> find it in my fav's. TIA

> Jack Taylor

Here ya go

[shawn_a]

Put the money in the bank, Richard!

A quarter weighs 5.67g according to my numistmatist friend I just called. He's quicker than Google lemme tell ya. Now this is assuming you are using a "normal" quarter, none of this old-time rare coin jazz. And if for some reason you are using a silver quarter, the weight is 6.25g. All this info I get from a 20 second phone call.

shawn

[paul_n_oneal]

[Jim Holtz]

> Nick sent me two for a secret entry into the
> DIY Iowa event. Time is short but I think I
> can come up with something. Not going to
> tell you what the other drivers are at this
> time. Must have a little surprise afterall.
> So who besides Nick goes to the Iowa DIY
> event? I know I know some of you .

> Paul

Actually, I received excellent feedback from folks planning on attending and expect 30+ people and 20-25 speakers this year. It will be a full day of listening to a wide variety of designs.

Of course, now we know that Nick has a "secret" entry. I won't tell anyone. :-)

Jim

[paul_n_oneal]

> Actually, I received excellent feedback from
> folks planning on attending and expect 30+
> people and 20-25 speakers this year. It will
> be a full day of listening to a wide variety
> of designs.

> Of course, now we know that Nick has a
> "secret" entry. I won't tell
> anyone. :-)

> Jim

Thanks Jim, I knew you could keep a secret . Hey, now you will actually get to hear one of my designs. Anyone else besides you that I know here on the board attending?