3-way update... *PIC*

[dzach]

Here's the latest pic of my 3-ways...
The middle section does not have any poly on it yet, so it looks a little different than the other sections.
Next steps... a few more coats of rub on poly, finish the crossovers, and wire them up...

[robertcottiers]

> Here's the latest pic of my 3-ways...
> The middle section does not have any poly on
> it yet, so it looks a little different than
> the other sections.
> Next steps... a few more coats of rub on
> poly, finish the crossovers, and wire them
> up...

DZ: That's a clever design...I like how you broke up the cabinet into 3 sections with the contrasting horizontal wood strips(walnut??)..The base is also a nice detail.Hurry up and finish them!!

Regards Bob C.

[Pete Schumacher ®]

> Here's the latest pic of my 3-ways...
> The middle section does not have any poly on
> it yet, so it looks a little different than
> the other sections.
> Next steps... a few more coats of rub on
> poly, finish the crossovers, and wire them
> up...

Very nice looking.

Are you planning on grills? That's always my stumbling block.

[howard]

> Here's the latest pic of my 3-ways...
> The middle section does not have any poly on
> it yet, so it looks a little different than
> the other sections.
> Next steps... a few more coats of rub on
> poly, finish the crossovers, and wire them
> up...
Good looking project. What drivers are you using?

[dzach]

Thanks Bob for the compliments.
The horizontal wood is red oak... I wanted to use walnut, but could not find any at the local Lowes or HD (about the only options in my area)... so instead I just used dark walnut stain.

Dave

> DZ: That's a clever design...I like how you
> broke up the cabinet into 3 sections with
> the contrasting horizontal wood
> strips(walnut??)..The base is also a nice
> detail.Hurry up and finish them!!

> Regards Bob C.

[robertcottiers]

> Thanks Bob for the compliments.
> The horizontal wood is red oak... I wanted
> to use walnut, but could not find any at the
> local Lowes or HD (about the only options in
> my area)... so instead I just used dark
> walnut stain.

> Dave

I'm guessing a Morel MDM-55 midrange?

Bob C.

[dzach]

Definitely grills. I imbedded magnets behind the veneer.

There will likely be 2 grills for each speaker (maybe 3). I have the bottom ones done and they just cover the 2 drivers. Still have to work on the top grills... not sure yet on the look for those.

> Very nice looking.

> Are you planning on grills? That's always my
> stumbling block.

[dzach]

Thanks Howard.
The drivers are:
RS180 (x2)
Morel MDM55
Seas 27TDFC/TV

> Good looking project. What drivers are you
> using?

[scottanderson]

Nice work. Keep the pics comming.