crossovers fo omni-directional speakers

[audiophool]

I bought a pair of Pioneer CS-05 omni-directional speakers that I am modifying to fit 3midrange drivers to go with the existing 3tweeters & 8" down firing woofer. I am swapping out the Pioneer drivers with Cerwin Vega drivers to voice match my Cerwin home theater speaker setup. The drivers that I am going to use are all rated at a 125 watts. The frequency response for the tweeters & midrange drivers are 60hz to 20khz & the woofers are 30 hz to 800hz. They have an 8ohm impedence. What kind of crossover would be recommended for this setup?

[Pete Schumacher ®]

> I bought a pair of Pioneer CS-05
> omni-directional speakers that I am
> modifying to fit 3midrange drivers to go
> with the existing 3tweeters & 8"
> down firing woofer. I am swapping out the
> Pioneer drivers with Cerwin Vega drivers to
> voice match my Cerwin home theater speaker
> setup. The drivers that I am going to use
> are all rated at a 125 watts. The frequency
> response for the tweeters & midrange
> drivers are 60hz to 20khz & the woofers
> are 30 hz to 800hz. They have an 8ohm
> impedence. What kind of crossover would be
> recommended for this setup?

Unless you have response plots of the drivers, there's no way to determine what the crossover will look like to produce a smooth response.