Anyone Have Experience With This 24" Subwoofer ?

[mike1234]

Provided Link: Atomic ELE 24"


<A HREF="http://www.atomicspeakers.com/ele24.html">http://www.atomicspeakers.com/ele24.html</A>

[philiparcario]

> <A HREF="http://www.atomicspeakers.com/ele24.html">http://www.atomicspeakers.com/ele24.html</A>
never heard of them and I can't download the specs be careful

[philiparcario]

> never heard of them and I can't download the
> specs be careful
dvc 2ohms dont know if it is each or both in parallel
fs=19.60
sens=95.3db
xmax=15mm
voice coil= 100mm
qms=5.2
qes=.266
qts=.253
vas=774 liter I get a huge box of 6 cubic ft with a port of 6 inchs wide and 11 inches long
f3 of 38hz I would not want that for anything other than prosound

[mike1234]

[philiparcario]

If you want a sealed 4.5 cu ft will work but you will need an amp with eq. The f3 for sealed is about 50hz not low at all.

[Wolf]

> never heard of them and I can't download the
> specs be careful

...in the automotive sound groups. They're based in OH, last I knew, and have beaten SPL records in the past. I can imagine the 24" being for dB dragging in particular, where extension is not the issue, but it just looks very mean!!
Later,
Wolf

[mike1234]

I had a pair of homebrew third generation EV Patricians. These used the EV 30W woofer. Although X-max was limited, these would crack windows if set too close to them and they sounded quite good doing so. The 30W's are nearly impossible to find though. I've always regretted selling them. These 24" subs "should" produce more SPL than the old 30W's. I was wondering about sound quaility. If they're any good, two would make a ****** HT IB setup.

> ...in the automotive sound groups. They're
> based in OH, last I knew, and have beaten
> SPL records in the past. I can imagine the
> 24" being for dB dragging in
> particular, where extension is not the
> issue, but it just looks very mean!!
> Later,
> Wolf

[mike1234]

Provided Link: http://bicostereo.com/index.php?act=...productId=3360