27TDFC + ???????? 2-way MT, already designed.

[Andy_G]

Cabinet sides may get curved a bit, but builder will keep correct rectangular baffle.

Builder can only fit a small to mid 2-way in his study.

The guy may be able to afford a pair of ScanSpeak in a month or so (tax return time over here).

Vifa, Peerless also ok, and more affordable.

Seas, unsure of availablity unless imported.

Any suggestions ???

[Andy_G]

... must have built an MT with the 27TDFC, and used something other than a Dayon RS. ??

[gowa]

If you can get Seas, what about John's SR71?
http://www.zaphaudio.com/SR71.html

[Andy_G]

If you can get Seas, what about John's SR71?
http://www.zaphaudio.com/SR71.html

I knew there was one somewhere. Thanks.

I'll have to see if i can get the Seas ER.

[Andy_G]

It is the size he wants. We will have to get the ER18 from Madisound.
Waiting for freight cost. I have a pair of TDFC's he can have to get him started. (got given a pair of D26NC the other day. what comes around goes around etc)

All x-o components will be Jantzen coils and caps because that's what we can get. The only value that we can't match is the 3.5ohm, but I'm sure a pair of 6.8ohm in parallel will be close enough, and I will have to unwind a 3.9mH P-core to 3.3mH for him.

Maybe use a Visaton SAF cap for the 40uF in the impedance compensation.

Anyone see any problem with these components, I can't !

The guy is a pretty good carpenter, so once I've sorted things out for him, he's on his own.