Re: Dual Woofer
Wiring them in parallel will result in an increased sensitivity of about 6db. It will also result in a combined impedance of 4 ohms. So you need to insure that the amplifier driving them can drive 4 ohm loads.
Originally Posted by HammerBoy
Nothing wrong with wiring them in series other than the resulting impedance will then be 16 ohms and you won't get a significant increase in sensitivity like you will wiring them in parallel.
You will need a low pass crossover for the woofers and a high pass crossover for your LRC. Most HT reciever has this feature built in all you need to do is use the subwoofer line out and use a seperate amplifier to drive the woofers. Do you intend to use these as subwoofers to compliment Left Center and Right speakers?
If you can read this, thank a teacher.
If you are reading it in English thank a Veteran.