Line arrays...again !

[akgapong]

Hi All

Have been a while, but I start building enclosures for quite a bit.

Later,

Iggy

[WWWJD]

Got Dust?

Looks like an awesome build!

[akgapong]

Hi Mark

Thanks! Can't wait to finish them. I work 6 days/week and some time on sunday.

Later,

Iggy

[diru]

Excellent start.............

So whats going in there?

B&G ? and ?

Looking again maybe Dayton PT .

Are those done yet

[akgapong]

Hi Diru

You got me. I played with PT for years. This time B&G...NE08/8 ohm version.

Thanks,

Iggy

[Wolf]

Iggy-
You're using tweeters with the Neo8, right? The Neo8 is more of a mid, and IMO requires a tweeter to further its range.
Later,
Wolf

[J.Lee]

Wolf -

Sometimes your comments are absolutely Great!

Thanks for your willingness to help people!

Listen to this guy IGGY!

[akgapong]

Hi Wolf...J. Lee

Thanks for replied. Yes I will use Ne08, but 8 ohm version and specific custom design for line arrays.

Later,

Iggy

[johnnyrichards]

Iggy, I get tired of my router after doing one round-over. Good work.

[akgapong]

Hi Johnny

I understand. BTW thanks, I will try to finish them in next two or three weeks or so. Please stay tune.

Later,

Iggy

PS. Nice to see you around.

[Taterworks]

I have heard the Neo8 PDR version used as a widebander mid-hi driver to good effect. It sounded very much like the MartinLogans that I have heard, with a slight easing-off at the top end that the OP might find pleasing without supertweeters.

[akgapong]

Rory
Neo8 I use for my line arrays is the same version LS9 line arrays.

Thanks,

Iggy

[diru]

what you doing with the finish there?

[akgapong]

Diru Baffle w/rust-oleum black satin.
Back w/rust-oleum black textured.
Side w/red oak paper back veneer.

Later,

Iggy

[Big Stogie]

subscribe, looks great got any driver details or links?
thanks,
Mike

[akgapong]

Mike!

Please be patient. I will post detial ASAP when I finish them.
The midbass...RS180/8ohm.

Later,

Iggy

[akgapong]

Crossover is low....just say around 850.

[Big Stogie]

Mike!

Please be patient. I will post detial ASAP when I finish them.
The midbass...RS180/8ohm.

Later,

Iggy

OK, I hear ya! I am just interested in this design and can't find too many build threads. I was looking at these Peerless 835004 SDS 6-1/2" buyouts and at the price and the way they would stack because of the frame I got interested. I figure 8 of those might be great with the right tweeter. I would love a ribbbon but cannot justify the expense for a first time build of a design
that I know nothing about. I have the BMF palns and saw those but I am looking for something a bit more "robust"
Mike

[akgapong]

http://www.parts-express.com/pe/show...TOKEN=78707901

How about this one. I got 20 of them if you interesting please mail me for very good price. Band new never use.

Later,

Iggy

AKGAPONG@AOL.COM

[Big Stogie]

Looks like a better driver, but blue cones? Need to digest that one a bit they would look horrible in this room and I did not want a grill, well maybe
ML