Robert's De-Speakerin' Sale Louisville Area pickup only

[robert]

Get moving and help me move! Either PM me or send an email to bantly_robert@hotmail.com

Following items available for local pickup price extremely negotiable.

Reasons: I have a Suzuki TL1000 L-Twin racebike in the garage that is being brought up to track-ready status, and a job relocation in October, so all must go! Additionally, my first hobby (mc) has taken over and you need lots of expensive stuff to track-ride. Just itchin' to hit 160 legally and in the proper gear.

6 Infinity Primus 150 Speakers (Black) and 1 Infinity Primus Center Channel along with the top-line PE wall / ceiling metal shelf mounts for the 4 surrounds - 40.00 EACH for the 150's and 60.00 for the CC Get a 7.1 receiver, build a nice kick-b*tt sub and your 7.1 is done.

Humongous collection of crossover parts in Plastic bins - lots of high $ coils, good caps and a collection of Dayton and other resistors. Will sell bulk with slotted bins, or as cap box / coil box / resistor box. Won't break it up, too much trouble, but it's a steal!

SoundEasy 14 with Dongle - Ed, you get first dibs on this one if you want - includes color printed manual.

Drivers:

2 Tang Band W6-789 Shielded NIB
2 Fountek FR88EX 8 Ohm NIB
1 Dayton SD215 DVC Sub NIB
2 Audax HT240ZO 10" Aerogel Drivers - unobtanium NIB 95dB
4 Vifa H26TG35-06 HL Dome Tweets - high efficiency NIB - also unobtanium and 95dB
Handful of ND16FA's NIB
2 Vifa DQ-25 titanium tweets - tested, never mounted
2 TB W4-1320 SD Truncated Bamboo woofers NIB
2 Peerless 2.5" wide range alum. woofers - black finish new

Amps:

2 Boston LCAI220 in wall from the last PE sale
2 Modded Accurian amps - bass and treble controls defeated.

Measurement Rig and such

1 complete Bobco all connection 100% handmade measurement leads and case - see my album.

Lotsa cables - balanced, shielded, and otherwise

Adjustable height Mic Stand

Yamaha 4-channel mixing board

Behringer ECM8000 with cal sheet and file.

And a lot of other stuff that's negotiable - hardware, mounts, precision port kits, etc.

Since I will likely be in a small apt, it'll be ZRT's and a headphone amp for my cans. Additionally expect to be no longer single in the near-future...

Cheers / Robert

[kmibb]

Pizzle Mizzle

[arlis_1957@yahoo.com]

would love some of those x-over parts but not sure when ill b down that way again.

[robert]

Arlis: buy 'em all though the shipping on the copper won't be super cheap - you'll even get the plastic hardware cabs they are in! I'll pm ya a list of the coil and major cap values.

Gotta work on this:



Almost as sexy as SS Revelators, but not as well behaved - stock suspension won't keep the thing on the ground...

[robert]

Found More Stuff -

2 Eminence Beta 8 NIB
2 Eminence Beta 8 used
1 Dayton 70W sub plate amp used.

Edirol UA1-EX Soundcard used

As with everything else, very negotiable.

Cheers / Robert

[Mr B.]

Hi Robert-I live in Jeff and would like to check out the x-over parts and maybe some of the other speaker building goodies you have. PM me with price and good time to see what you have. Thanks-Brent

[edlafontaine]

Robert,

I'm into my 3rd week of a job, finally. I let myself get way out of shape...it is factory work.

I'll jump on the soundeasy, maybe some other stuff, like the edirol

I guess the Beamer is gone?

Congratulations on the status change.

[robert]

Nope - still have the BMW and the sportbikers pick on me for being able to ride it 300 miles + and still walk, along with bringing the chow and gatorade . I got the Su used and super cheap (it has been down and had some issues), and like all old vehicles, the more I dig in, the more I find that needs replacement. Sigh.

PM Sent.

[robert]

XO Parts Collection - SOLD.

[Wolf]

XO Parts Collection - SOLD.

RATS!
I hope you still come out to the events...if the location is willing.
Later,
Wolf

[robert]

Wolf - you should get the Odd-Axe 10's; PaulK did an ML-TQWT and got them to 30Hz and they are 95-96dB at 2.83. They would definitely fall into the realm of unusual. Just need an unusual / large box; I've seen a horn load or 2 on the web also.

Cheers / Robert

[robert]

UPDATED LIST:

Drivers:
2 Tang Band W6-789 Shielded NIB
2 Fountek FR88EX 8 Ohm NIB
1 Dayton SD215 DVC Sub NIB
2 Audax HT240ZO 10" Aerogel Drivers - unobtanium NIB 95dB
4 Vifa H26TG35-06 HL Dome Tweets - high efficiency NIB - also unobtanium and 95dB
4 ND16FA's NIB
2 Vifa DQ-25 titanium tweets - tested, never mounted
2 TB W4-1320 SD Truncated Bamboo woofers NIB
2 Peerless 2.5" wide range alum. woofers - black finish NIB
4 Eminence Beta 8's - 2 NIB, 2 Used
1 4 Ohm RSS265HF - used

Amps:
2 Boston LCAI220 in wall from the last PE sale (NIB)
2 Modded Accurian amps - bass and treble controls defeated.

Other:
2 PE 0.25cf standard cabs - Cherry finish - new

Measurement Rig and such: (on hold for Ed L.)
1 complete Bobco all connection 100% handmade measurement leads and case - see my album.
Lotsa cables - balanced, shielded, and otherwise
SoundEasy 14 with Dongle and printed and bound manual
Adjustable height Mic Stand
Yamaha 4-channel mixing board - MG82CX
Behringer ECM8000 with cal sheet and file - calibrated by Herb Singleton at Cross-Spectrum.

Cheers / Robert

[spasticteapot]

Would you consider shipping the FR88EXs or calibrated mic?

[ameuba10]

how much for the pair of W6-789 shipped to 27312

[pmt257]

pm sent about the Beta8A's