I 'Made' Some Baltic Birch

[jclin4]

...not for real but virtually in Google Sketchup, so I can use it later drawing up future projects. It's 0.7086" (18 mm) thick, and 11 ply including the faces. I made an assumption that the ply's and face are the same thickness...don't know if that is true in reality.



I've uploaded it to the 3D warehouse. Search for 'Baltic Birch' and it should be there...a 5' x 5' sheet 'cause that's what I understand they usually come in (I've never handled any in person and am itching to use BB in a project).

To resize, every ply-section on the edge will need to be selected before you use the push-pull tool. You can also resize each ply separately. I don't know if the 'make component' tool would alleviate this problem. I'm still a sketchup newbie

Cheers,
- John