FS: 3x Exodus Maelstrom-X 18" drivers in Ohio

[NEO Dan]

I have no plans to rebuild a dedicated HT anytime soon so I'd like to pass them on to someone who will put them to good use. Asking $400 each, but I'll show some flexibility for a motivated buyer. These are first production run units, the ones you want IMO. These should not be shipped unless on a pallet.

[Pallas]

I have no plans to rebuild a dedicated HT anytime soon so I'd like to pass them on to someone who will put them to good use. Asking $400 each, but I'll show some flexibility for a motivated buyer. These are first production run units, the ones you want IMO. These should not be shipped unless on a pallet.

Bump for some serious air pumps.

And agreed that the Mk. I/preorder one is the Mael-X to have. It has the lowest normalized inductance of the line by a big margin, and dual 8Ω coils makes them pretty flexible. They're also well before the epoxy issues that plagued later ones.

[cjd]

Only 3?

I really wanted the 21's, but I need a matched 4 for my project. :/

Awesome drivers. Hopefully you find a good home for them all!

[NickJ]

I am actually pretty interested in these. Does anyone have TS parameters, or an idea of what kind of box/power these would need?

[NEO Dan]

Hi Nick,
I do have TSP's, and I can provide cut sheets and drawings, I'll have a look in my windows box tomorrow for the info.

I had a setup that would go into the low teens, it had an EP2500 bridged per driver for headroom. It was FANTASTIC!

[mike price]

Any idea what it would cost to ship them? And what kind of play time do they have on them?

[NEO Dan]

Sorry for the delay guys,
I finally found the shipping scale and each boxed driver is 55lbs, so it'll be ~200lbs from 43302 if you care to check with freight company's that service your area.

[NEO Dan]

Bump!

If anyone is interested I would be willing to meet them at the MWAF...

[cjd]

You have a PM.