This DIY 2-way speaker project kit is offered for sale for the drivers & the constructed crossover networks as used components. I presently have them in prototype monitor cabinets (8"W X 19"L X 14"H) that has been roughly assembled, as I wanted to hear the results before investing in expensive veneer wood, with the indent to later construct a finely finished cabinet. Now I am moving and need to part with the speakers.
I don't believe it is worth shipping the cabinets to a buyer. Instead, I would remove the drivers/crossover networks, pack them to ship and someone could build new cabinets (20L or 1220.47cin with a 2”x4” port required). For a local pickup here in Toronto, however, a buyer could take them complete as they are.
All connection made with WBT Silver Solder. TARA LABS SPACE AND TIME - TFA RETURN speaker wire used throughout, with (2) 5' runs with a splice in them hard-wired to the crossover network, included. My total original investment for these high-quality drivers & crossover components was close to $1200.
(2) MOREL HU621
Power handling: 160 watts RMS/220 watts max
Impedance: 8 ohms
SPL: 90 dB 1W/1m
Frequency range: 35-4,000 Hz
Dimensions: A: 6-5/16", B: 5-5/8", C: 2-1/2". Coated, injected DPC cone 2-1/8" diameter Hexatech voice coil Ultra-low stray magnetic field
(2) MOREL SUPREME 110 Tweeters
Power handling: 220 watts RMS/300 watts max Impedance: 8 ohms
Frequency range: 1,600-22,000 Hz SPL: 91.5 dB 1W/1m
Dimensions: A: 4-5/16", B: 4", C: 2".
2-way crossover specifications:
12 dB/octave crossover with a Zobel impedance compensation network & an L-Pad on the tweeter. The tweeter is connected in reverse polarity
Crossover Frequency: 2000 Hz
Overall rated frequency response with the Morel drivers 35Hz - 22,000 Hz
Last edited by gino; 06-17-2012 at 07:12 PM.
Reason: lower price