FS: Parasound HCA-1000A High Current Amplifier

[jakeparsons]

Over the years, I have simply accrued too much audio equipment and need to liquidate some of it. I have 3 power amps and although this amp is very good, the others are both lower powered class A amps and since I have started building rather efficient speakers, I don't need an amp with this much power anymore which is 125w @ 8ohms and 200w @4ohms.I am the original owner, but do not have the original box. The amp will come with the original power cord.

Price: $250 shipped to the USA only. The last one listed on ebay sold for $222.00 plus shipping and this one is in at least as good of shape.
The ONLY imperfection is a very minor nick on the top of the faceplate roughly just right of center and can only be seen from less than 3 feet away. In the last 3-5 years, the amp has been used SPARINGLY because it has been rotated in an out of my system with 2 other amps.


Thanks,


Jake

[jakeparsons]

I am trying to get two up close pics loaded but seem to be having issues. I will keep trying but you can email me personally at audiospeakerred@yahoo.com

[jakeparsons]

This is NOT the most recent up-close pic I took, but I will keep trying...

[jakeparsons]

I just edited the original post to lower the price to $275 shipped in the U.S. which means the amp itself is priced at less than $250.

Also, I do have close-up pics taken of the amp itself, front and back, but the file size is too big to post them here (I have tried numerous times).

Therefore if you would like better pics, email me at the address given earlier in the thread or at: jacob.parsons @ drake.edu (no spaces)...



Thanks,


Jake

[scottq]

Hi Jake,

Just wanted to say that I love your cabinet/stands... a big fan of those contrasting natural wood colors (see avatar) Beautiful.

[jakeparsons]

Thanks Scott! I like them too. The ONLY disadvantage is that Iowa winters are very dry and since those speakers are solid wood over MDF, they will crack when it gets dry, so I don't use that particular speaker from November to April...they are in the basement where it is JUST enough more humid to keep them safe... They would probably be fine in Coastal Alabama year round though! And they are obviously walnut and hard maple with just lacquer on them to maintain the color contrast. I made another striped speaker too...it is a 2.5 way and both crossovers were done by Rick Craig of Selah audio...it looks about the same but has a slightly different baffle...here is that one

[jakeparsons]

Bump for price change. As edited in the original post, I have lowered the price of this to $250 shipped anywhere in the U.S.. With the way I pack, that is essentially $210 for the amp as it will weigh 30 pounds packed (22 pounds for the unit only). I doubt I go any lower because I have a sub project in mind and if I don't sell it for this price, it will bridge to 400w and make a good sub amp.

[scottq]

I bet that Revelator 2.5 way is phenomonal, especially if Mr. Craig was involved

I say keep it and use it as a sub amp - Parasounds have great low end control...