FS: poly caps, solid and air core inductors various sizes (Dallas, TX)

[DannyT]

bump

[DannyT]

Thanks John, I hope you can get some good uses out of them.

[jhollander]

Danny, I got my parts today, very fast, and well packaged.

These were a sweet deal as the parts were NEW with no solder marks. The resistors are some that I can actually use.

Thank you!

[carlthess40]

The RXE is a re-setable fuse. If you Google RXE0750 it will provide results for Digikey and Mouser. Not sure on the RDE...

I believe your right about it From what I found on PE website is this polyswitch speaker protector is an automatic resetting circuit breaker that protects against excessive current, voltage, and temperature by interrupting the flow of current.

[davidroberts]

The RXE is a re-setable fuse. If you Google RXE0750 it will provide results for Digikey and Mouser. Not sure on the RDE...

[DannyT]

I’m going to pull one apart this weekend and take pics and see what’s inside

That would be the best.

[DannyT]

The RXE/RDE I believe are some sort of protection device, and likely not true resistors.
My guess is they might be light bulbs.

Later,
Wolf

Thanks Wolf for your insights. The circuit symbol does indeed looked weird. I googled but could not find anything like that.

[carlthess40]

I’m going to pull one apart this weekend and take pics and see what’s inside

[Wolf]

The RXE/RDE I believe are some sort of protection device, and likely not true resistors.
My guess is they might be light bulbs.

Later,
Wolf

[DannyT]

I found a bag of resistors so if you figure out the ohms value of RDE 070 and RXE 075 then I can throw them in if I have those resistors.
On the binding posts and cups, I only found 3 of each so I can give you 2 pairs. Let me know.

[DannyT]

Since you need 2 pairs of KI-102, I need to shuffle a little. The KG4 pair will keep the same but the KI-102 will be in this picture. I just unwind 1 of the inductor to 1.25mH but will do the rest when we have a deal.
I only have 4 1uF and that is only enough for 1 pair, you will need another pair of 2uF.
The 10uF in the woofers circuit for this 2 pairs is different but that is all I have left. You can use as is or buy another pair to match them.
I will do $60 shipping included for all 3 pairs.

[carlthess40]

On the KI-102 I would need them for four speakers and the kg4 just two speakers I’ll have to check and see if the crossovers are on the input cups and if they are I would need new ones. 6 of them

[carlthess40]

So all of it for 45 plus shipping?

[DannyT]

KI-102 pair, I will unwind the bobbin core inductors down to 0.3mH.

[DannyT]

KG4 pair, I will unwind the 3.3mH down to 1mH