FS: poly caps, solid and air core inductors various sizes (Dallas, TX)

[DannyT]

I have various sizes of crossover components for sale. Most are new but some have been tested on various projects. I will list them at around 50% off retails but I will give more discount when you buy more than 1 pair. I will ship at your expense if you buy more than $10 worth of stuff. Local pick up in Dallas, TX is more than welcome.

Solen Poly caps
80uf: $25/pair - 1 pair left
45uf: $15/pair
25uf: $12/pair
15uf: $7/pair - 3 pairs
3.3uf: $4/pair - 2 pairs

Bennic Poly caps
12uf: $5/pair - SOLD
10uf: $5/pair - 2 pairs left
4.7uf: $4/pair - SOLD

Solid core inductors (I can unwind these inductors down to your specific mH value with WT3)
8mh (Madisound 15g): $20/pair - 2 pairs
4.5mh (Erse 18g): $10/pair
3.6mh (Erse super Q 18g): $10/pair
4mh (no name, look like dayton 18g): $6/pair - 2 pairs left

Air core inductors, 18g (I can unwind these inductors down to your specific mH value with WT3)
3.3mh (dayton or MCM): SOLD
1.25mh (dayton or MCM): SOLD
.56mh ( dayton or MCM): SOLD
.22mh (dayton or MCM): SOLD

I have few other odd and end items likes high value NPE caps, resistors for free with your purchase.

[DannyT]

more pictures

[carlthess40]

Do you have anything for the Klipsch heresy1 Or the kg4 speaker crossovers? Or even the Klipsch KI-102 speakers? I will try to find the crossover info the the kg4 and KI-102 speakers Thanks

[DannyT]

I don't know the crossover components for those speakers. If you find out, I will check my parts bin to see if I have it.

[carlthess40]

Here’s a pic of the kg4 crossover sheet

[DannyT]

3uf: I have these.
8uf: I have 4.7 and 3.3 that you can run in parallel.
0.5mh: I have 0.56mh, close enough to use.
1mh: I have 1.25mh inductors that you can unwind some to bring down the value. IIRC, I used WT3 to unwind and measure custom inductor value.
33uf: I don't have these.

If you want to buy from me, I will put together a package deal for you.

[carlthess40]

Work me up a price to do two sets of crossovers. I would not know how to check it after I would unwind the wire for the proper measurement Unless you could do that for me. And if you could send a pic of the parts I’m a Visualization type person lol Thanks

[carlthess40]

One more item. I would like to make a passive low pass for some of my subs. Cutoff at 100hz or 120 I would need two at 120 and one at 100 All at 8ohms

[carlthess40]

Here’s the sheet on the KI-102 crossover

[DannyT]

I checked my old laptop and I should be able to unwind inductors and measured the correct mH for these speakers. I have all the components for both pair of speakers except the 33uF caps, RDE 070 and RXE 075 looks like some kind of resistors but I don't know the ohms value.
Components for the KG4 pair: $25
Components for the KI-102 pair: $20
I will ship them for free if you buy both. If you need terminal posts or cups, I can throw them in the box for you.
Let me gather them together then post pictures in few minutes.

[DannyT]

KG4 pair, I will unwind the 3.3mH down to 1mH

[DannyT]

KI-102 pair, I will unwind the bobbin core inductors down to 0.3mH.

[carlthess40]

So all of it for 45 plus shipping?

[carlthess40]

On the KI-102 I would need them for four speakers and the kg4 just two speakers I’ll have to check and see if the crossovers are on the input cups and if they are I would need new ones. 6 of them

[DannyT]

Since you need 2 pairs of KI-102, I need to shuffle a little. The KG4 pair will keep the same but the KI-102 will be in this picture. I just unwind 1 of the inductor to 1.25mH but will do the rest when we have a deal.
I only have 4 1uF and that is only enough for 1 pair, you will need another pair of 2uF.
The 10uF in the woofers circuit for this 2 pairs is different but that is all I have left. You can use as is or buy another pair to match them.
I will do $60 shipping included for all 3 pairs.