Tweet
Just add soundcard and ARTA
Behringer mixer w/phantom power for the Dayton mic. Includes PSU for mixer and all of the cables you should need. Keep in mind I was using a USB soundcard that has regular old RCA outputs. If you are using on-board sound, you will need additional cables.
CSL Calibrated microphone, download the necessary stuff here: https://1drv.ms/u/s!AlHuPRQmBiX2h6hL...NA9CQ?e=2Pcxj6
As I said, I used a soundcard with RCA outputs and recommend the Soundblaster XFi like this one:
https://www.ebay.com/itm/225456817784?epid=1138736794&hash=item347e4606 78:g:dPUAAOSwkDVkABQz&amdata=enc:AQAHAAAAsL0Hm BsEiDYxGSpTGC6SJuzWD6fFEFgD6FEVMa1ZBD+R+QMBJs7s42P 8v5ucokCE8SjIzr+X45Rtzls8C2x54Pcf9Ir4/daeRKhMaY8aNh7fQZBgzWJM5lNFja7IOchnzB7sAbW++kmx0ia h725cDp6FKQSCs7CVNHDjaBE/YRxkVLYmM4VRjisb/YRn8J92lFGy1DS70S8XcJsnjioQl8E3bpkvL5mUbmcFkrlx+pu v|tkp:Bk9SR4Lc79LUYQ
Only selling because I am tired of messing around with it. I am aware of the benefits it offers over plain jane USB and will likely regret it someday but for now the entire kit can be yours for $70 shipped to the lower 48. Paypal only. I usually ship stuff Friday afternoons or Saturday in the AM.
Bonus is a LIMP jig, it uses 100 ohm resistance (I think) and utilizes the left channel on the input side of things. Ugly, but it works just fine.
Fancy red cable does not come with the kit, wife reminded me it does not actually belong to me and I had borrowed it from a friend years ago and should probably return it although every musician I know has miles of these things but whatever. The included cable is, I believe, a 25 footer so it should be adequate.
PM here or email me at: [email protected]
Edit: no idea why it displays the two large images of the impedance sweep. The photo handling on this forum software leaves a lot to be desired. Like, a LOT.
Behringer mixer w/phantom power for the Dayton mic. Includes PSU for mixer and all of the cables you should need. Keep in mind I was using a USB soundcard that has regular old RCA outputs. If you are using on-board sound, you will need additional cables.
CSL Calibrated microphone, download the necessary stuff here: https://1drv.ms/u/s!AlHuPRQmBiX2h6hL...NA9CQ?e=2Pcxj6
As I said, I used a soundcard with RCA outputs and recommend the Soundblaster XFi like this one:
https://www.ebay.com/itm/225456817784?epid=1138736794&hash=item347e4606 78:g:dPUAAOSwkDVkABQz&amdata=enc:AQAHAAAAsL0Hm BsEiDYxGSpTGC6SJuzWD6fFEFgD6FEVMa1ZBD+R+QMBJs7s42P 8v5ucokCE8SjIzr+X45Rtzls8C2x54Pcf9Ir4/daeRKhMaY8aNh7fQZBgzWJM5lNFja7IOchnzB7sAbW++kmx0ia h725cDp6FKQSCs7CVNHDjaBE/YRxkVLYmM4VRjisb/YRn8J92lFGy1DS70S8XcJsnjioQl8E3bpkvL5mUbmcFkrlx+pu v|tkp:Bk9SR4Lc79LUYQ
Only selling because I am tired of messing around with it. I am aware of the benefits it offers over plain jane USB and will likely regret it someday but for now the entire kit can be yours for $70 shipped to the lower 48. Paypal only. I usually ship stuff Friday afternoons or Saturday in the AM.
Bonus is a LIMP jig, it uses 100 ohm resistance (I think) and utilizes the left channel on the input side of things. Ugly, but it works just fine.
Fancy red cable does not come with the kit, wife reminded me it does not actually belong to me and I had borrowed it from a friend years ago and should probably return it although every musician I know has miles of these things but whatever. The included cable is, I believe, a 25 footer so it should be adequate.
PM here or email me at: [email protected]
Edit: no idea why it displays the two large images of the impedance sweep. The photo handling on this forum software leaves a lot to be desired. Like, a LOT.
Attached Files
Comment