Tweet
ALL SOLD, thanks!
2011/04/14
Hello,
Should of consolidated these all to begin with...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
I have a NHT A1 monoblock (full-range, but also a great sub-amp).
Have a NHT A1 amplifier, which is usually used for subwoofers but is actually completely full-range. On those lines, the amp does NOT have a low-pass crossover, gain, or phase control, so all that must be handled by the active crossover/HT receiver/etc. up the signal chain.
The amp sounds great though, and the auto-on and balanced XLR-in are great features.
Have the original box/manual.
$150 local, $170 shipped to the west coast, $180 shipped to the east coast.
Amp is 200/300 watts RMS into 8/4 ohms.
Electronics | Mono Amplifier | High End Home Theater
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Have a great QSC amplifier I'm selling to pay for a bigger one. Only used at home for a home stereo. In perfect condition, though I don't have the original box. Found a great box from a previous amplifier in the closet - so can ship this out. Shipping would be $30 on west Coast and $40 towards the east. This is a GREAT amplifier for the sub/woofer section on an active 2/3/4 way.
Price for local/shipped to the west coast/shipped to the east coast:
$375 / $405 / $415
Specifications, from this site: QSC - PLX Series Amplifiers
STEREO MODE, Both Channels Driven
8 ohms 20 Hz-20 kHz 0.03% THD: 300W
4 ohms 20 Hz-20 kHz 0.05% THD: 500W
2 ohms 1 kHz 1% THD: 800W
BRIDGE MONO MODE
16 ohms 20 Hz-20 kHz 0.1% THD: 600W
8 ohms 20 Hz-20 kHz 0.1% THD: 1100W
4 ohms 1 kHz 1% THD: 1600W
Signal to Noise (20 Hz-20 kHz): <-107 dB
Input Sensitivity @ 8 ohms: 1.2Vrms
Input Sensitivity @ 4 ohms: 1.1Vrms
Voltage Gain: 40x (32 dB)
Output Circuitry: AB
Power Requirements (1/8 Power Pink Noise @ 4 Ohm): 10A
* Exclusive PowerLight power supply for superior bass and lighter weight
* Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
* LED indicators include bridge mono and parallel input modes
* Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack
* Selectable clip limiters and subsonic filters reduce distortion and protect speakers
* Variable-speed fan for low noise and solid 2 ohm performance
* Both 1/4" TRS & XLR inputs, Speakon® and shock-proof binding post outputs
* 3-year warranty plus optional 3-year extension available
Owner's manual: http://media.qscaudio.com/pdfs/plxuser.pdf
PLX series specs: http://media.qscaudio.com/pdfs/plxspec.pdf
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Carver Pro ZR1000
One of the best amps I've ever heard (went from a pair of Monarchy SM-70 Class A monoblocks to the Carver...) I am the original owner of the Carver... have the box and manual. I had the dealer replace the fan (yes, it's unfortunately fan-cooled) with a quiet one, which is pretty inaudible from more than a few feet away.
$270 local/$300 west coast/$310 east coast
Specs are:
225 wRMS @ 8 ohms stereo
350 wRMS @ 4 ohms stereo
700 wRMS @ 8 ohms bridged mono
Has Speakon outputs, etc., selectable 40/80 Hz. high-pass filter, clip limiting, etc.
Specs (from my Dropbox):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
A used pair of Magneplanar MMGs, in great condition, though an older pair. Friend of mine recently moved into a smaller apartment and doesn't have room for them. $300 for the pair, definitely local pickup only. Used with the home theater receiver below.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Polk Audio PSW10 10" powered subwoofer for $60. Sorry, local pickup only.
2011/04/14
Hello,
Should of consolidated these all to begin with...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
I have a NHT A1 monoblock (full-range, but also a great sub-amp).
Have a NHT A1 amplifier, which is usually used for subwoofers but is actually completely full-range. On those lines, the amp does NOT have a low-pass crossover, gain, or phase control, so all that must be handled by the active crossover/HT receiver/etc. up the signal chain.
The amp sounds great though, and the auto-on and balanced XLR-in are great features.
Have the original box/manual.
$150 local, $170 shipped to the west coast, $180 shipped to the east coast.
Amp is 200/300 watts RMS into 8/4 ohms.
Electronics | Mono Amplifier | High End Home Theater
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Have a great QSC amplifier I'm selling to pay for a bigger one. Only used at home for a home stereo. In perfect condition, though I don't have the original box. Found a great box from a previous amplifier in the closet - so can ship this out. Shipping would be $30 on west Coast and $40 towards the east. This is a GREAT amplifier for the sub/woofer section on an active 2/3/4 way.
Price for local/shipped to the west coast/shipped to the east coast:
$375 / $405 / $415
Specifications, from this site: QSC - PLX Series Amplifiers
STEREO MODE, Both Channels Driven
8 ohms 20 Hz-20 kHz 0.03% THD: 300W
4 ohms 20 Hz-20 kHz 0.05% THD: 500W
2 ohms 1 kHz 1% THD: 800W
BRIDGE MONO MODE
16 ohms 20 Hz-20 kHz 0.1% THD: 600W
8 ohms 20 Hz-20 kHz 0.1% THD: 1100W
4 ohms 1 kHz 1% THD: 1600W
Signal to Noise (20 Hz-20 kHz): <-107 dB
Input Sensitivity @ 8 ohms: 1.2Vrms
Input Sensitivity @ 4 ohms: 1.1Vrms
Voltage Gain: 40x (32 dB)
Output Circuitry: AB
Power Requirements (1/8 Power Pink Noise @ 4 Ohm): 10A
* Exclusive PowerLight power supply for superior bass and lighter weight
* Ultra-low distortion (0.03% THD at 8 ohms) & studio-quality noise floor (-107 dB)
* LED indicators include bridge mono and parallel input modes
* Compact 2 RU, 21 lbs. and 13" deep chassis fits into any rack
* Selectable clip limiters and subsonic filters reduce distortion and protect speakers
* Variable-speed fan for low noise and solid 2 ohm performance
* Both 1/4" TRS & XLR inputs, Speakon® and shock-proof binding post outputs
* 3-year warranty plus optional 3-year extension available
Owner's manual: http://media.qscaudio.com/pdfs/plxuser.pdf
PLX series specs: http://media.qscaudio.com/pdfs/plxspec.pdf
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Carver Pro ZR1000
One of the best amps I've ever heard (went from a pair of Monarchy SM-70 Class A monoblocks to the Carver...) I am the original owner of the Carver... have the box and manual. I had the dealer replace the fan (yes, it's unfortunately fan-cooled) with a quiet one, which is pretty inaudible from more than a few feet away.
$270 local/$300 west coast/$310 east coast
Specs are:
225 wRMS @ 8 ohms stereo
350 wRMS @ 4 ohms stereo
700 wRMS @ 8 ohms bridged mono
Has Speakon outputs, etc., selectable 40/80 Hz. high-pass filter, clip limiting, etc.
Specs (from my Dropbox):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
A used pair of Magneplanar MMGs, in great condition, though an older pair. Friend of mine recently moved into a smaller apartment and doesn't have room for them. $300 for the pair, definitely local pickup only. Used with the home theater receiver below.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~
Polk Audio PSW10 10" powered subwoofer for $60. Sorry, local pickup only.
Attached Files
Comment