Hello,
Consolidating a lot of stuff:
$77 firm: OneAC MD1102 medical grade 2.2A isolation transformer
Picked up a JBL LSR6312SP studio 12" subwoofer - unfortunately with a blown amplifier. These have the really nice neodymium differential-drive motors that JBL does so well - though in an awkward 2 ohm impedance (driver is the 252F). T/S parameters here: http://www.audioheritage.org/vbullet...l=1#post142107
Here's what it came out of: http://www.jblpro.com/www/products/r...ries/lsr6312sp
Dust cap is ripped, will do $85 firm for it with the factory enclosure OMG FREE???!!!! Pickup in Los Angeles, of course. If you just want the driver - because of the neo motor, it's actually freakishly lightweight, so wouldn't be terrible to ship. CONUS only, sorry international friends.
Have a nice Tannoy in-wall subwoofer, the dual long-throw 6.5" IW 62TS. $85 firm.
Subwoofer (dual 6.5" cast-frame woofers):
http://www.proacousticsusa.com/tanno...subwoofer.html
or
OneAC MD1102 medical grade 2.2A isolation transformer, $73 firm.
Bought a Class D Audio CDA-1000 kit with the upgraded 600VA transformer to run bridged into two channels of subwoofers. Ended up getting a Yamaha pro-audio amp before I even opened up the box - so I have it for sale, still unopen from when I bought it, for the same $250 plus shipping that I paid.
Kit link:
http://www.classdaudio.com/amplifier...-1000-kit.html
Amp module link:
http://www.classdaudio.com/amplifier...x-2-8-ohm.html
Build log of a 4 channel amplifier based on this kit (with the normal 400VA tranny):
http://www.facstaff.bucknell.edu/esa...rroundAmp.html
Contains two CDA-254 modules and one large power supply. Each CDA-254 is good for
125 @ 8 ohms stereo
250 @ 4 ohms stereo
or
500 @ 8 ohms mono
Exodus Audio PR18 18" passive radiator, cast frame, with mass kit: $55
Probably more stuff I forgot about.
All are local-pickup-only.
cheers,
-Tal, who is trying to simplify his life and reduce the amount of stuff he has
Consolidating a lot of stuff:
$77 firm: OneAC MD1102 medical grade 2.2A isolation transformer
Picked up a JBL LSR6312SP studio 12" subwoofer - unfortunately with a blown amplifier. These have the really nice neodymium differential-drive motors that JBL does so well - though in an awkward 2 ohm impedance (driver is the 252F). T/S parameters here: http://www.audioheritage.org/vbullet...l=1#post142107
Here's what it came out of: http://www.jblpro.com/www/products/r...ries/lsr6312sp
Dust cap is ripped, will do $85 firm for it with the factory enclosure OMG FREE???!!!! Pickup in Los Angeles, of course. If you just want the driver - because of the neo motor, it's actually freakishly lightweight, so wouldn't be terrible to ship. CONUS only, sorry international friends.
Have a nice Tannoy in-wall subwoofer, the dual long-throw 6.5" IW 62TS. $85 firm.
Subwoofer (dual 6.5" cast-frame woofers):
http://www.proacousticsusa.com/tanno...subwoofer.html
or
OneAC MD1102 medical grade 2.2A isolation transformer, $73 firm.
Bought a Class D Audio CDA-1000 kit with the upgraded 600VA transformer to run bridged into two channels of subwoofers. Ended up getting a Yamaha pro-audio amp before I even opened up the box - so I have it for sale, still unopen from when I bought it, for the same $250 plus shipping that I paid.
Kit link:
http://www.classdaudio.com/amplifier...-1000-kit.html
Amp module link:
http://www.classdaudio.com/amplifier...x-2-8-ohm.html
Build log of a 4 channel amplifier based on this kit (with the normal 400VA tranny):
http://www.facstaff.bucknell.edu/esa...rroundAmp.html
Contains two CDA-254 modules and one large power supply. Each CDA-254 is good for
125 @ 8 ohms stereo
250 @ 4 ohms stereo
or
500 @ 8 ohms mono
Exodus Audio PR18 18" passive radiator, cast frame, with mass kit: $55
Probably more stuff I forgot about.
All are local-pickup-only.
cheers,
-Tal, who is trying to simplify his life and reduce the amount of stuff he has
Comment