Announcement

Collapse
No announcement yet.

Very long cable for OminMic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • arlis_1957@yahoo.com
    replied
    Re: Very long cable for OminMic

    my mcm catalog has one the will work up to 1000 for less than $20. sure would making measurements outside easier.

    Leave a comment:


  • PEB
    started a topic Very long cable for OminMic

    Very long cable for OminMic

    Hello everyone.

    I needed to use the OmniMic 60 feet from my lab desktop PC.

    I found that a USB extender works perfectly. (PE sells these. However I purchased the IO Gear GUCE51 at Fry's.)

    Basically, the connection scheme is this:
    OminMic cable -> USB transmitter -> Cat5e/Cat6 cable -> USB receiver -> PC_USB-port

    In my case, I used a 100-foot Cat6 cable. Note that a regular Cat5 cable did not work, as evidenced by the OM blue LED not lighting. So you must use Cat5e or Cat6 cable only.

    Phil Bamberg
Working...
X