Announcement

Collapse
No announcement yet.

Omni calibration file format

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • exojam
    replied
    Re: Omni calibration file format

    Thanks Jeff.

    Now if I could only get the cal file into a filter for Spectrum Labs I would be golden.

    James

    Leave a comment:


  • Jeff B.
    replied
    Re: Omni calibration file format

    Originally posted by exojam View Post
    Thanks guys for the time and reply.

    So basically the second column is the correction value in db for the first column? Just asking to make sure I am following it.

    James
    Yep.

    Leave a comment:


  • exojam
    replied
    Re: Omni calibration file format

    Thanks guys for the time and reply.

    So basically the second column is the correction value in db for the first column? Just asking to make sure I am following it.

    James

    Leave a comment:


  • Jeff B.
    replied
    Re: Omni calibration file format

    Originally posted by greywarden View Post
    I believe they are freq, amplitude, phase

    not 100% on that, though, but that's usually the order of the three.
    Yes, it is essentially an frd file with the same three columns.

    Leave a comment:


  • greywarden
    replied
    Re: Omni calibration file format

    I believe they are freq, amplitude, phase

    not 100% on that, though, but that's usually the order of the three.

    Leave a comment:


  • exojam
    started a topic Omni calibration file format

    Omni calibration file format

    I was wondering if someone could tell me the format of the Omni calibration file.

    Below are a few lines from mine. It appears the first column contains the frequency, the second the is value needed to correct that frequency(?) and I am not sure what the third number is.

    4.6758 -0.2119 6.12
    5.099 -0.1226 6.27

    Thanks.
    James
Working...
X