Dayton Audio PA385S Opinions

[analogkid442]

What did you end up with? I bought a pair of these around November. Built a single driver box. 4.5cf tuned to 37 hz. I'm not really happy with the output. Measuring with DATS shows different properties than the published stats.

I'm curious how yours ended up?

Care to share your measurements?

[HugChopShop]

What did you end up with? I bought a pair of these around November. Built a single driver box. 4.5cf tuned to 37 hz. I'm not really happy with the output. Measuring with DATS shows different properties than the published stats.

I'm curious how yours ended up?

[raulbrady]

I modeled them in a 4 cu ft box in WinLSD, looks like a winner although the Port Speed is a bit high. But a 3-4' box would be a lot easier to move that a 7' cu. for an 18. I think two small cabs would be the way to go. google street view

Thank you very much!! Very useful advice

[Mark H]

I modeled them in a 4 cu ft box in WinLSD, looks like a winner although the Port Speed is a bit high. But a 3-4' box would be a lot easier to move that a 7' cu. for an 18. I think two small cabs would be the way to go.

[Chris Roemer]

Well, they look like they'd do over 120dB @ 40Hz @ 1000w in a 3cf box (ea. driver) w/a pair of 4"id x 7" long vents (ea. driver).

[Mark H]

What's the opinion on a pair of these for sub duty in a smallish PA setup? I'm not concerned a ultra low bass, just decent output. I would rather move two smaller cabs than one larger 18" sub.

https://www.parts-express.com/dayton...8-ohm--295-040