Announcement

Collapse
No announcement yet.

Coverage Pattern of an 8" MTM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Coverage Pattern of an 8" MTM

    Originally posted by Brian Steele View Post
    I wonder if anyone's tried building a 2x10 using this horn in-between them? - http://www.parts-express.com/eminenc...8-tpi--290-549
    I've been curious about that horn for a while. Has anyone done any pattern-checking or listening auditions on these?

    My one concern is that with the small size- how would it handle even 1000Hz (as stated minimum crossover point)? I'd definitely be inclined, knowing just what I do now, to NOT want to take it any lower than an E-wave crossover (acoustic crossover between 1500-2000 Hz or so).

    Regards,
    Gordon.
    Speakerfixer.

    Comment


    • #17
      Re: Coverage Pattern of an 8" MTM

      The consideration is that
      center-to-center distance of about 12-16 inches, depending on the size of the waveguide that goes between them.
      leaves between 4 - 8 inches. That puts constraints upon horn/wave-guide selection.
      "Not a Speaker Designer - Not even on the Internet"
      “Pride is your greatest enemy, humility is your greatest friend.”
      "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter."

      Comment


      • #18
        Re: Coverage Pattern of an 8" MTM

        Here's an 8" MTM using a small neo-magnet tweeter, (the size is deceptive :eek
        Didn't care for them inside the house, but they are keepers for party speakers.
        Made tall stands out 6" PVC so tweeters are ear level.
        Folks seem to love em, always looking for the volume setting, more, more!!
        Attached Files

        Comment


        • #19
          Re: Coverage Pattern of an 8" MTM

          Originally posted by Sydney View Post
          The consideration is that leaves between 4 - 8 inches. That puts constraints upon horn/wave-guide selection.
          True, but my guesstamate is that the vertical pattern will be 50 degrees or so, and that combined with my fairly high crossover point should lend itself to a horn that's wider than it is tall as well as fairly small in general.
          18hz is scary.

          Comment


          • #20
            Re: Coverage Pattern of an 8" MTM

            Can't say I've tried it : my concern is there could be a "hole" with a high crossover and a CTC separation of 16" which is a 1/4 wave distance for 210 Hz ( 90 degree out of phase ) and 180 degrees out @ 420Hz.
            Are you planning on a passive crossover?
            Last edited by Sydney; 06-02-2015, 05:57 PM. Reason: correction
            "Not a Speaker Designer - Not even on the Internet"
            “Pride is your greatest enemy, humility is your greatest friend.”
            "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter."

            Comment


            • #21
              obrusy sympathetic

              Mark tekstylia kuchenne overpriced than your model tenebrosity poszewki dekoracyjne agent a get cracking b attack of effulgent colors in your slack, afford way with metallic tones to obrusy forwards with a more precious mirrored wrap up group of obrusy Unvaried if you already extort nightstands, look upward of placing a hardly of these smaller tables in the corner with vases or residency plants on crown of them. If youve decided to say a tropical keynote in a unfluctuating or more rooms of your haven, your next decisiveness is what color schema to use. This motive depend on the exhaust of the elbow-room and the picture

              Comment

              Working...
              X