Bluetooth WineBox with new PE plate amp and TB W3-881 drivers

[ceiol]

I've used all mentioned, and are great with a tweeter. I'm not looking for thump, just a nice balanced sound. Thanks

PS95-8 or Vifa TC9 are my choices for best overall. RS100 also up there.

[Jake]

I’ve used all of those. If you want bass in a 3.5” speaker then go with the ND91 or ND90. Aura NS3 is reportedly the same as the ND90. Or use a separate tang band 3.5” subwoofer driver in a 2.1 amp set up.Â*
Â*

I've used all mentioned, and are great with a tweeter. I'm not looking for thump, just a nice balanced sound. Thanks

[ceiol]

I was eyeing these up on sale, but assumed there's little to no low end.Â* You've worked with these tb-w3, ps95, pc83, fe83, and probably others. Which do you think are best bang for the buck.Â*

I’ve used all of those. If you want bass in a 3.5” speaker then go with the ND91 or ND90. Aura NS3 is reportedly the same as the ND90. Or use a separate tang band 3.5” subwoofer driver in a 2.1 amp set up. 
 

[Jake]

I was eyeing these up on sale, but assumed there's little to no low end.  You've worked with these tb-w3, ps95, pc83, fe83, and probably others. Which do you think are best bang for the buck. 

[ceiol]

Just a quick project using a wine box and the new PE bluetooth plate amp.

Total volume of the enclosure is about 0.13 cubic feet. two ports, each 1" x 3.5" tunes it to about 85 to 90 Hz. Drivers are the Tang Band W3-881 using a simple contour filter consisting of a 0.75 mH inductor and a 4.7 Ohm resistor in parallel on the + speaker leads

I modified the PE plate amp by removing the spring terminals for the second speaker and closing the gap. I will re-use that spring terminal set for a second set of speakers using another identical plate amp -- that way the second speaker will have a terminal that will match the one on the amp.