Announcement

Collapse
No announcement yet.

Cap for 3 tweeters in series

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dynamo
    replied
    Remember, if not using a film cap like poly, electrolytic caps must be non-polarized or bipolar (same thing).

    Leave a comment:


  • Chris Roemer
    replied
    A (tiny) 0.6-0.7uF cap would be in the "park", but 2nd order would be MUCH better (by adding a shunt coil - to ground, in the 1.2-1.5mH range).
    This could vary a LOT depending on what type of padding you use.

    (sorry Ben)

    Leave a comment:


  • Wolf
    replied
    This forum is for finished projects, photos, and links to rite-ups or build threads. You'll get more results for a query over in the TechTalk sector.

    Later,
    Wolf

    Leave a comment:


  • john@jetsquality.com
    started a topic Cap for 3 tweeters in series

    Cap for 3 tweeters in series

    Hi - I'm planning a project where i will be running an array of 3 Dayton Audio ND16FA-6 5/8" Soft Dome Neodymium Tweeters in series - these are 6 ohms each - in series 18 ohms. I would like to look at a crossover at about 4K Hz. What capacitor would get me in that ballpark? I'm trying to get somewhere close before I start experimenting. Any help would be appreciated.
Working...
X