If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you have an immediate customer service issue, please visit us at Parts Express
Thanks Jeff. Do the ports go through 2 walls on their way out? The amp is inset, but your picture of the inside only shows a straight wall at the back.
Andy.
Yes, the ports do go through 2 walls. I don't have a photo of it, but here's one from Gordy's build that's similar.
Thanks Jeff. Do the ports go through 2 walls on their way out? The amp is inset, but your picture of the inside only shows a straight wall at the back.
Andy.
Very nice smooth finish. Is that paint, duratex, truck bed liner, or something else? I can't tell from the pics.
The paint is Valspar satin black latex enamel. I rolled it on. I first put on some Rustoleum oil based, it went on like glue. I sanded it all off and went with the Valspar, much nicer paint.
I had a friend ask me to build him a boom box. He said he wanted it to have a full sound but didn't want it to be too large. I had recently built a set of the Overnight Sensations and I figured the bass would be sufficient. I incorporated the Lepai 2020a with 5a PS. He said he didn't need battery power since he just wanted to use it in his home. It turned out pretty well. It sounds nice and he said it was just what he wanted. I have to mention this build was influenced by Gordy's Madeleine and bolland83's Sprite build, thanks guys!
Leave a comment: