Where's the thread???

[Whitneyville1]

Are there any major changes needed to use the Aura NS3 8 ohm? I can build the slightly larger boxes (if really needed). Right now, the NS3's are running barefoot in some ~3.5L ported enclosures, tuned to about 50 Hz, which is really too low.

[donradick]

As always with the current "vbulletin" software, an outside search (Dogpile in my case) worked much better than
searching here at PE.

PE thread:

[Kevin K.]

Use the advanced search feature to filter it down a little further. I searched the word "Helium" and then under member name "scottsehlin" This was the first one on the list of results.

http://techtalk.parts-express.com/forum/speaker-project-gallery/64062-helium-a-true-micromonitor

[Millstonemike]

Here's the build thread on the AVS forum ...

http://www.avsforum.com/forum/155-diy-speakers-subs/1951657-helium-micro-monitors-build-thread.html

[Whitneyville1]

I tried "search" and looking up Scott's name with no luck. So where's the "Helium's" build thread? All I found are references to the build thread. (???)