Next ?

[filmslayer]

ok , i got them to open in Xsim , i just had to move the center line down 30db ....





here they are if you want to try them ...

ds90tweetaxis1-6.frd rs225tweetaxis.frd neocd1.0.frd

[jhollander]

As you can measure, what would be great is to repeat the measurements with smoothing in the 1/48 range and get the Tweeter plus Mid in parallel and the Tweeter plus Woofer in parallel, all without moving the mic and volume. That would be a total of 5 frds. We'll use the combined measurements to find the offsets.

If you want do the nearfield frds on one mid and the woofer and we can have the complete picture. Total of 7 frds

[filmslayer]

we can work on that ... been listening to this all day . sounds pretty good ...

[rpb]

Your most recent files are incorrect frd files. Make sure you are set to tabular as shown in post 223.

[filmslayer]

Your most recent files are incorrect frd files. Make sure you are set to tabular as shown in post 223.

what are they not doing ? the work for me ....

[filmslayer]

working with my files ....

[rpb]

what are they not doing ? the work for me ....

[ATTACH=CONFIG]n1366132[/ATTACH]

It appears that your HOLM export text separator is set to semicolon. It should be set to tabular. PCD can not open the file the way it currently is posted above.

[filmslayer]

It appears that your HOLM export text separator is set to semicolon. It should be set to tabular. PCD can not open the file the way it currently is posted above.

so how do you save a measurement in Holm ? i thought i did when making the files and taking pics , but i cant find them ....

i am glad they are working in Xsim .

[rpb]

so how do you save a measurement in Holm ? i thought i did when making the files and taking pics , but i cant find them ....

i am glad they are working in Xsim .

Export it.

[filmslayer]

i did export , thats how i got the frd's . when i try to open measurements all i get is compressed zipped files and none of the ones i'm looking for . some older ones so i've done it a couple of times . not sure why i can't find these ....

[filmslayer]

John , what do you mean by " the tweeter plus mid in parallel " and likewise with tweet and woof ?

[filmslayer]

putting it up on a stand and getting it in the middle of everything does make a difference !

[jhollander]

To find the tweeter to mid offset you need a measured FRD that has the tweeter and mid electrically connected together. You use that FRD as a guide to compare it to the tweeter and mid files connected in XSim or PCD.

[filmslayer]

i'll try and get these ... i'm having some issues with my measuring set up though . this morning i started getting a digital clipping prompt i've never seen . also a lot of noise in the impulse response . trying to suss that now .

[filmslayer]

so my mic was bad and sent back to PE . they are out of stock until 4/30 .... uhg ! i have been listening to this and enjoying it the few weeks, not wanting to make any changes . i have one of my 180P/28F surrounds as my other channel .