New Peerless Tweeter

[civit]

Xmax, as long as you have the calipers out, would you mind telling me what the exact size of the seos 8 opening is? And the size of the mounting flange? Assuming that's the seos 8 you have pictured.

[xmax]

[xmax]

[Wolf]

With the measured specs I got, I can't get them to go below 38 pretty much at all. I sacrificed 5 ltrs to go from 38 to 40 Hz in terms of F3, yielding a 20 ltr box.

Later,
Wolf

[jhollander]

I had them in 30 liters with an F3 of 35. No worries, I'm also liking the newer SB 8-inchers.

[Wolf]

I already have the woofer pair, and the RSS265PR pair to go into 20 ltrs...
Heehee, what a shoehorn,
Wolf

[jhollander]

I'm hoping the TX and the 2096 will meld well...
We'll see...
Wolf

Dang that was on my shopping list...

[xmax]

What Wavecor tweeter are you using? Is it going in any waveguide?

http://techtalk.parts-express.com/fo...-t-labs-sb-etc

[xmax]

I mean the DA25TX, the subject of the OP in this thread.
Wolf

I figured that out finally. 

[ani_101]

What Wavecor tweeter are you using? Is it going in any waveguide?

[Wolf]

I mean the DA25TX, the subject of the OP in this thread.
Wolf

[xmax]

Is there a mechanical drawing for this conundrum? 

[xmax]

[Wolf]

I'm hoping the TX and the 2096 will meld well...
We'll see...
Wolf

[xmax]

It does have an acoustic function. It keeps you from screaming loudly when the dome gets dinked.
Wolf

Wolf, where did you end up with your 8" 2 way design? I will have these tweeters, the new RST and the Wavecor 
as well as the 9.5" Satori and Epique 8" for extensive testing. I remember you looking into the TB W8 at one 
time, as was I until I did more measurements, the W8 has such high 3rd order distortion I think it might be 
broken, I'm going to revisit the testing today with the other driver to see what was wrong. So far the Satori
9.5" and Wavecor is a excellent combo, I have only listened to them actively (analog) crossed over, so 
far and they go together very well!