Tweet
Anyone know what sound bar buyout special 299-714 was used in? Looks interesting for 4 bucks
-
Last edited by Dwight; 02-06-2020, 10:06 AM. -
The text says a sound bar, but not which one, and I cannot read the back of the driver. -
Those model really well, incidentally. You can get pretty good output from four of them.Don't listen to me - I have not sold any $150,000 speakers.Comment
-
It actually looks unbelievable (esp. for $4). Anyone run one on DATS?
Xmax allows full rated power (25rms) down to 25Hz.
Mid 20s in 0.7cf tuned to high 20s.
40Hz in 0.4 closed cu.ft. Q near 1.0 .
Comment
-
This may be the dumbest question of the day, but how would you power four 6 ohm speakers? Sent from my moto g(6) play using TapatalkOriginally posted by johnnyrichards View PostComment
-
Make two series pair, and parallel those pairs, for a final of 6ohms.Comment
-
A 6ohm series-parallel "quad". Most 8ohm amps might even be OK with that.Comment
-
Thanks for the help. Sent from my moto g(6) play using TapatalkComment
-
Would this be a correct wiring diagram? Sent from my moto g(6) play using TapatalkAttached FilesComment
-
-
Yes, that is what you are after.Comment
-
Had not noticed that one before. It has indeed some excellent specs and seems like a real bargain at that price!“I cried because I had no shoes until I met a man who had no feet”
If we all did the things we are capable of doing, we would literally ASTOUND ourselves - Thomas A. Edison
Some people collect stamps, Imelda Marcos collected shoes. I collect speakers.:DComment
-
I was a little shocked when I saw it's ts specs. I would like to know how many they have and what soundbar they came out of? Sent from my moto g(6) play using TapatalkComment
-
Looks like they have over 1,350 of them at the moment.
That is a REALLY good price for what it can do.
TomZZarbo Audio Projects Youtube Channel: https://www.youtube.com/channel/UCEZ...aFQSTl6NdOwgxQ * 320-641 Amp Review Youtube: https://youtu.be/ugjfcI5p6m0 *Veneering curves, seams, using heat-lock iron on method *Trimming veneer & tips *Curved Sides glue-up video
*Part 2 *Gluing multiple curved laminations of HDFComment
-
It's likely an OEM from TB.
Wolf"Wolf, you shall now be known as "King of the Zip ties." -Pete00t
"Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
"He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
"We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith
*InDIYana event website*
Photobucket pages:
https://app.photobucket.com/u/wolf_teeth_speaker
My blog/writeups/thoughts here at PE:
http://techtalk.parts-express.com/blog.php?u=4102Comment
-
I see 2 in 1.4cf to go low...
now, at $4 apiece, you could put a quad in 1.4cf isobaric.
SA100 amp @ 25Hz. SEEMs like a cool "smallish" sub.Comment
Comment