Announcement

Collapse
No announcement yet.

Advanced Speaker Korp A+ crossover

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fpitas
    replied
    Originally posted by djg View Post
    I guess we told him. He asked at Audiokarma too.
    Maybe he'll get an answer he likes better over there

    Leave a comment:


  • djg
    replied
    I guess we told him. He asked at Audiokarma too.

    Leave a comment:


  • dwigle
    replied
    I think the crossover is posted on the human speakers website. It looks like the woofers are running full range. You could upgrade the components, matching original values. But to redesign the crossover, you'll need some measurements from the drivers.

    Leave a comment:


  • AEIOU
    replied
    Originally posted by Kevin View Post
    I have a set of Advanced Speaker Korp A+ speakers l would like to upgrade the crossovers. I took a look at the crossovers but can't tell if they 2 way or a 3 way. There is 2 8" drivers and 2 peerless tweeters and 2 passive bass speakers in each speaker. Any one know what type of crossover l need to buy for this upgrade thanks.
    Hi, I'd like to rebuild my car engine. Which bolt do I remove first?

    Leave a comment:


  • AEIOU
    replied
    Originally posted by Kevin View Post
    I have a set of Advanced Speaker Korp A+ speakers l would like to upgrade the crossovers. I took a look at the crossovers but can't tell if they 2 way or a 3 way. There is 2 8" drivers and 2 peerless tweeters and 2 passive bass speakers in each speaker. Any one know what type of crossover l need to buy for this upgrade thanks.
    In such a scenario as yours, you either need to learn start to finish how to design and build a crossover or find someone who knows how. It's not something we can talk you through. If you can draw a schematic, then you can figure out what type of setup you have there. A very unsophisticated approach would be to replace the original crossover components one at a time, with same electrical value but higher quality manufacture.

    Leave a comment:


  • fpitas
    replied
    Originally posted by billfitzmaurice View Post
    How do you know they need 'upgrading'?
    Yes, and what do you expect from upgrading? If I'm not mistaken those are very old. The drivers may not be in tip-top shape anymore.

    Leave a comment:


  • billfitzmaurice
    replied
    How do you know they need 'upgrading'?

    Leave a comment:


  • djg
    replied
    Is there something about them you don't like?

    https://www.humanspeakers.com/o/advance.htm

    Leave a comment:


  • fpitas
    replied
    By "need to buy" you're hoping someone already came up with another crossover design and sells it? I bet you have to measure and come up with your own design. And if you're thinking of some generic crossover board, that's a big step backwards 99% of the time. But sometimes you get lucky.

    Leave a comment:


  • Kevin
    started a topic Advanced Speaker Korp A+ crossover

    Advanced Speaker Korp A+ crossover

    I have a set of Advanced Speaker Korp A+ speakers l would like to upgrade the crossovers. I took a look at the crossovers but can't tell if they 2 way or a 3 way. There is 2 8" drivers and 2 peerless tweeters and 2 passive bass speakers in each speaker. Any one know what type of crossover l need to buy for this upgrade thanks.
Working...
X