Announcement
Collapse
No announcement yet.
Boozetooth Speaker MKIII
Collapse
X
-
I'm looking into a slightly larger 12v option that used a ND65 driver as well.....let's see how that plays out lol
-
Almost the same as MK8, just different assembly at the top and mounts for the hardware. The other noticeable difference is just the DSP settings are slightly different to the other.
Leave a comment:
-
-
Ok couldn't just waste a perfectly good print/paint job.... Did this one slightly different where there are dual 10mm ports (did prior to modelling) and created a internal sleeve that you glue in place and bolt the lid down to.
Fun fact this ones white regions will glow in the dark and is technically MK7
Yeah I won't be doing anymore cans, this is just finishing off a 75% complete job that's been staring at me with puppy eyes to pay it some love. The way this one ended up i was trying to utilise some of the deadspace around the edges, where the Mk8 was extremely tight and i suspect may take up more internal volume than this iteration, will be interesting to see when 100% assembled if this one has more of the lower end than its younger brother. I also tried something different with the DSP and looked at the bass shelf/boost option in lieu of the EQ
Leave a comment:
-
Fyi I had it running today at a moderate volume as I was working at got over 6 hours until it decided to lose connection...which may be due to my BT headphones being also paired. Would be interesting to let it run all day with no clashes and see what runtime I get. Thought that was fantastic for one 18350 1200mah battery setup so far
Leave a comment:
-
Originally posted by LOUT View PostEven with the pictures earlier I somehow underestimated how...can-like?..it looks until watching the videos (maybe the camera movement highlights how smooth and glossy you got it).
Really cool results.
Leave a comment:
-
Even with the pictures earlier I somehow underestimated how...can-like?..it looks until watching the videos (maybe the camera movement highlights how smooth and glossy you got it).
Really cool results.
Leave a comment:
-
Originally posted by tomzarbo View PostMan, that little thing sure can get loud!
So you're finally happy with it? You sure did stick with it.
TomZ
Leave a comment:
-
Man, that little thing sure can get loud!
So you're finally happy with it? You sure did stick with it.
TomZ
Leave a comment:
-
-
Originally posted by Steve Lee View PostJust thinking outside of the can, mate.
or there is even a couple of those massive german beers....the mind boggles....."Alex! step away from the rabbit hole, you only just climbed out of this one"
Leave a comment:
-
Wired up and i can honestly say i've had enough of this tiny project
https://youtu.be/7R068GGK1_w
it aint going to shake any fixtures off the walls, but considering its size and what it is powered by i can honestly say i'm happy with how it turned out.... I really need to take a page out of tomzarbo book and get some better recording equiptment thats for sure, my busted up pixel 2 really doesnt cut it and i can hear some parts in the video where it sounds like it is muffled, but its full 360 degrees sound baby!.
next will be a 12v version of something...........just nothing has popped into my head yet
Leave a comment:
-
Originally posted by Steve Lee View PostTry modeling MkIX in a Fosters Sized Can and increasing the diameter of the driver used?
I ran it yesterday and it was sounding pretty decent, then when i glued, screwed and assebled i must of bumped a cable and something went in crooked and it was all painful from there. I'm just doing a few tweaks at the moment, but think it should sound ok for a 5w driver being powered by a 18350 3.7v battery. I'll be moving on from these ultra tiny builds after this one, you can only take so many hot glue and solder burns before you break lol
Leave a comment:
Leave a comment: