Is a two way using the Dayton DA215-8 and a tweeter practical ?

[gregrueff]

The only project I know of recently with the DA215 is the one Greg Rueff did with a 3-way.

Thanks for the bump Ben.

If you're interested, you can find in-box measurements of the DA215-8 here in post #20.

I used a tank filter on it too.

Cheers!
Greg

[augerpro]

I have a pair of Da215's for a future project pairing them with 3" Faitals in an old school design, but after measuring the 3/4" Peerless ring radiator on my 8" waveguide, I thought that might be a fun and cheap little project: https://www.somasonus.net/peerless-vifa-ot19nc00-04

[Wolf]

No prob, Greg! Keep up the good work.
Wolf

[LOUT]

It looks like a tank/notch-filter might be able to knock that peak down as much as ~15db more.
These sims are using the half-space PE FRD/ZMA files, so baffle-step/diffraction isn't shown (hence the big booty down low).

[Drjay]

Thanks. That looks like what I was thinking I will do.