Tweet
Has anyone used any CNC services that can take CAD files and machine MDF panels?
-
-
You might see if you have a local makerspace and see what resources they have available. Also check into local cabinet shops or "custom woodworking". I'm fortunate enough to have a makerspace pretty close to my house with a CNC router w/ full sheet capacity.Thanks,
Aaron -
If you just want panels, don’t waste your time with a CNC. Find a cabinet maker, a big table saw is much more efficient for ripping straight lines. CNC services can get expensive, usually charge by the hour if machine runtime plus tooling setup.
Maker spaces are a great option as well if you want to DIY."I just use off the shelf textbook filters designed for a resistor of 8 ohms with
exactly a Fc 3K for both drivers, anybody can do it." -XmaxComment
Comment