Announcement

Collapse
No announcement yet.

XO help to shelf rising response of metal dome tweeter response above 10k?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    No doubt. This was just a simulation for a Titanium dome tweeter and I didn't previously know how to deal with that kind of rising impedance profile in the crossover.

    Comment


    • #17
      Once you introduce an LPAD to tame the tweeter it too will have an impact on this response/impedance. In a lot of cases you can fine tune the balance of resistance in an LPAD to flatten the tweeter response. Only then in the most extreme cases of a rising response might you need to further add a Zobel-esk network to flatten. (I've done it before - but more often than not, in the final network it wont be needed).

      Comment

      Working...
      X