Announcement
Collapse
No announcement yet.
Drool.... New Morel Rohacell driver...
Collapse
X
-
With the lowest note on a (7 octave) piano being near 30Hz, and a clavichord playing only 5 octaves, I'm guessin' that you lose either 1 (60Hz) or 2 octaves off the bottom end (120Hz), so ... PERFECT (for YOU) !
-
Sealed? OK if you listen to Chamber music, I suppose. I don't think a clavichord can even do 60Hz?
No. Vented, w/a 3"id x 10" long rear port in 1.5cf. F3 in the high 30s. Fc @ 1.6k.
Leave a comment:
-
A pair of these woofers would go VERY NICELY with these tweeters, I suspect.
https://www.parts-express.com/Morel-...d-Pair-277-100
Probably crossover around 1800. Smallest sealed box as possible...
Leave a comment:
-
Suppose you were gifted these. And someone was making boxes for you.
It’s like any other speaker you build- how large a cabinet is acceptable.
based on datasheet I’d go with 1.5cu ft with Fb 27 for F3 42Hz;, as a woofer for a 3 way. Taking it up to 600Hz to a Morel 2-4” cone/domeLast edited by tktran; 01-03-2022, 04:15 AM.
Leave a comment:
-
It would need a low-reacher in a 2-way, but my initial thought was a woofer for the TSCM634 and the Textreme SB tweeter. Maybe the TX tweeter would do it, but that's hard to say...
Wolf
Leave a comment:
-
Wolf, if you're dreaming, how would use this driver and what would you pair it with? That is a beautiful driver, but its pricing makes my eyes water. Glenn.
Leave a comment:
-
Unbiasedsound, it's the grocery store that's killing me! And the electric bill and the gas bill and the water bill...
Ricky-Pooh
Leave a comment:
-
If inflation keeps rising I wont be able to afford anything at P.E. LOL
- 1 like
Leave a comment:
-
Thanh, the high HD is what the driver is missing. The TSCW636 woofers I have measure REALLY low through the mid band. I expect these are no different.
However, I DID notice that the SCW/TSCW moniker drivers from Morel have taken a HUGE price hike. They are up about $120 over the previous retail cost.
Wolf
Leave a comment:
-
Slobber, slobber, drool, drool. Where's that winning Powerball ticket???
Hope Sandy Claws was good to everybody!
Ricky-Pooh
Leave a comment:
-
Even if I could afford it, what could I do with it, that I couldn’t do with other drivers?
Some odd behaviour between 600-1Khz; and a mild shelf, which really limits it to a woofer use, but not displacement for a subwoofer.
The sensitivity is nice at 90dB/2.83V (8ohm)
I am missing something…
Leave a comment:
-
Ouch.
Here's the winISD file if anyone's interested. Change .txt to .wdr.
Get an f3 of around 34hz in 55Ltrs tuned to 32Hz. Max mechanical power of about 35watts.Attached Files
Leave a comment:
Leave a comment: