Extra Parts Design Ideas RS180-8, w4-1337, xt25

[xsilverjag]

I have some extra drivers and I was curious if anyone knew of a good design to put these to work. Just trying to find an interesting use for some of the parts before I list them for sale.

4 RS180-8
2 W4-1337
1 xt25BG60

Thanks

[xsilverjag]

I am considering Amiga or ZRT 3.5 for something fun.

[djg]

The Mini Statements would use the woofers and mids.

http://speakerdesignworks.com/MiniStatements.html

[Wolf]

I bet you could use the XT's with those too if you wished and wanted to tweak a bit. That'd make a dynamite TMWW!

Wolf

[PWR RYD]

I bet you could use the XT's with those too if you wished and wanted to tweak a bit. That'd make a dynamite TMWW!

Wolf

I agree! Just one XT25BG60 away from having all the drivers needed to build a killer TMWW. Just add MDF and about $150 in crossover parts and you are there!

[xsilverjag]

I bet you could use the XT's with those too if you wished and wanted to tweak a bit. That'd make a dynamite TMWW!

Wolf

Sounds like I need to read up on speaker modeling. Get ready for plenty of help posts

[a4eaudio]

Sounds like I need to read up on speaker modeling. Get ready for plenty of help posts

Looking forward to this, that looks like a nice driver combo.

Not sure if waveguides are as useful in 3 ways, but there is a 3D-printable adapter to make the XT25 fit exactly to the Visaton WG148R waveguide. I have those tweeters and waveguides and got a new 3D printer for Christmas and will be printing the adapters for myself. If you want to go in that direction with waveguides, let me know and I can print and send you the same adapters.