Speaker simulator with high-pass filter

[hitsware2]

You can also use the Edge program to see the open "baffle" response, but ABC Dipole has both pseudo driver and baffle response.

Basta is even somewhat better for my purpose .... Thank You ..

[hitsware2]

At the link is John P. Kreskovsky's ABC Dipole:
http://musicanddesign.speakerdesign...._C_Dipole.html

Sorta over my head

[LOUT]

The VituixCAD (free program) has cabinet simulation for infinite baffle, reflection simulation for open baffle, and XO simulation for HighPass information.
You can drop your speaker's FRD and ZMA (it also has an easy tracer to make your own FRD and ZMA if the manufacturer doesn't provide) into the program and manipulate it to show OpenBaffle or InfiniteBaffle results...then save those and rightclick your frequency response in the XO and open that result as an "overlay" so you can play around with different high-pass circuits on your driver to see which comes the closest.
Don't forget to add a bafflestep simulation (in the reflection simulation) to your driver's response if it isn't in-wall.