If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you have an immediate customer service issue, please email Parts Express at [email protected] or call 800-338-0531, Monday-Friday 8am - 5pm EST.
It's a -5dB swing no matter how you look at it.
Wolf
"Wolf, you shall now be known as "King of the Zip ties." -Pete00t "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith
Here is the in-box measurement from my Bantams micro speaker which uses the AMT Pod-4 automotive tweeter pair.
Somewhat similar dip in a similar place. I used it as a natural low end roll-off on my speakers which used the Dayton ND-91 woofer.
High cross, but it works fine in the real world.
The final result was a very flat frequency response.
Comment