Announcement

Collapse
No announcement yet.

Help! Dust cap pushed in on Scan-Speak woofers..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help! Dust cap pushed in on Scan-Speak woofers..

    I have two very nice Scan-Speak 5" woofers with the dust caps pushed in. I have tried the vacuum cleaner and it won't budge one bit! I don't want to poke a hole in them. Any ideas? Gluing something to them and pulling might work but will probably cause a little damage to the paper. I am interested in selling these btw if anyone is interested.

  • #2
    Fixed! Stuck a pen through the vent hole on back

    Comment


    • #3
      How much do you want for them now that they are like new again?

      :D

      Comment


      • #4
        One other way, if you cannot insert an object into the pole piece vent, use air pressure. Yes, blow into the pole piece hole and that can also pop out a pushed in dust cap, providing that the dust cap is not terribly porous.

        Comment

        Working...
        X