Dayton Audio LBB series

[3rutu5]

Does anyone know if.the newer boards have a 5v output directly off the board itself?

[3rutu5]

FYI im finding the documentation around any of the DA battery boards (KAB/LBB) quite terrible, there is hardly anything decent to find any information. I'm starting to think that the DA range is actually a copy of the Wondom/Sure JAB series as they have plenty of documentation.

[joshshetter]

FYI im finding the documentation around any of the DA battery boards (KAB/LBB) quite terrible, there is hardly anything decent to find any information. I'm starting to think that the DA range is actually a copy of the Wondom/Sure JAB series as they have plenty of documentation.

It's fairly well known that they are the same boards

[TroyH]

3rutu5,
I've attached a link below to the Dayton Audio expansion board that does provide a 5VDC output, DC input and LED indicator that is compatible with the Dayton Audio LBB-3V2 (not the v1), LBB-5V2 & LBB-5SV2 battery boards. This would provide two USB 5v outputs.

https://www.parts-express.com/Dayton...Boards-325-140

[3rutu5]

Yes thanks it is fairly known etc etc,

but i find the data contradicts each other..

https://store.sure-electronics.com/images/documents/AA-JA11113%2018650%20Lithium-ion%20Battery%20Balance%20and%20Protection%20Extension%20Board.pdf

if you look here it talks about running the battery boards in series or parallel is prohibited, yet DA claims you can run multiple boards. which i was strongly considering.

Thanks Troy i have see that board before, i have the older LBB board but read that it isnt suitable for the KAB range of amplifiers.

[3rutu5]

Also i dont know whats up with the forum and my devices, but i dont get notifications at all, on my android i cannot post/reply/comment and on my PC i get constant errors but 75% of the time it actually creates the response but something i would have to refresh to see