new project underway

[Mr. Wizard]

Re: new project underway

It was based upon Roy Allison's studies.

Thanks. Is his work on that on line?

[DougP]

Re: new project underway

If you're going to use a ribbon or a planar, please, please use a Fountek ribbon.

I like that idea alot but I checked with my wallet and he was not as excited. I am going to take a listen to the Dayton planar's before I make a decision.
Doug

[mzisserson]

Re: new project underway

That wood is Paduk.

[tom_s]

Re: new project underway

Doug,

Did you buy a truckload of that same cork that you used on the exteriors of your HT speakers? Those should be some seriously dead cabinets!!

I am meeting up with jakeb on Friday to pick up a pair of the NorthCreek tweeters, but I think he has the other pair still up for sale. Those should work well and not break the bank.

[DougP]

Re: new project underway

That wood is Paduk.

It's Purple heart. Rereading one of me earlier posts I see why there is a little confusion. Sorry about that.

Doug,

Did you buy a truckload of that same cork that you used on the exteriors of your HT speakers? Those should be some seriously dead cabinets!!

I am meeting up with jakeb on Friday to pick up a pair of the NorthCreek tweeters, but I think he has the other pair still up for sale. Those should work well and not break the bank.

The cork on my HT speakers is 1/4" and comes in 1 foot square sheets. The stuff for the inside of the speaker is 1/8" and comes in rolls. I got it at Ace hardware. It was rather expensive but I always buy local when I can. I will keep those tweeters in mind if the planars don't make the grade.
Doug

[waynew]

Re: new project underway

Doug,

I would second the North Creeks. I used them with a pair of Scan Speak Revelator 5 inchers at DIY IA way back in '05 or '06. Most of the guys there thought that the North's were Scans. They are an outstanding tweeter for the money! $36/pair is tough to beat. I have 3 or 4 pairs on hand at all times. Only downside is that North Creek will discontinue them in the very near future (I was hoping PE would pick them up, but I doubt that will happen)

WayneW

[[email protected]]

Re: new project underway

doug this is what i was refering too about being secretive. hows it going?
wayne, do you want to sell a couple of the norths?

[DougP]

Re: new project underway

doug this is what i was refering too about being secretive. hows it going?
wayne, do you want to sell a couple of the norths?

Man I have been so busy working on remodeling the house that I haven't touched my speakers in about 2 months. I just need to install the ports, cut the baffle, and mount the drivers and they will be ready for testing and crossover work.

They aren't anything special. Duel RS 180's on the bottom end. An open back fountek FW 146 as the mid-range and the Dayton Planar up top. The boxes are a constrained layer design that is 4 layers thick so I am looking forward to seeing how they sound.

I just need to find some time to get the work done. Maybe this week end.

Doug

[[email protected]]

Re: new project underway

intresting, mine is two rs-225-8 silverflute 5.5 and north tweet. looking foward to seeing what you've done. thanks for the update. i'll be building my second box this week as i am on vacation. i will take lots of pics.