2- Way Bookshelf

[Wolf]

Re: 2- Way Bookshelf

Thanks for the compliment, Mike! Phil Arcario has the Canvas now, so maybe you are close enough to Jersey to hear it?:rolleyes:
Later,
Wolf

[cckidd2]

Re: 2- Way Bookshelf

Thanks Wolf, Since this is my first build do you think i should use the M5's or the B4N? Also do you think the Dayton ND105-4 will be good for the overnight sensations?

[Wolf]

Re: 2- Way Bookshelf

First- you can't just swap in a different driver for a design. It doesn't work that way. If you change a part of a design, the redesign will be inevitable for optimum results. Every driver combination requires a custom xover tailored to that particular design. Not that there is not more than one way to do it, as there are many, but a custom solution is always the winner here.

Second-
I think you need to read Paul's FAQ, etc...

http://sites.google.com/site/undefinition/diy-gettingstarted

http://sites.google.com/site/undefinition/diy-mfaq

http://sites.google.com/site/undefinition/diy-mfaq2

http://sites.google.com/site/undefinition/diy-faqs

That will tell you more on what you can/can't do, and give you more information than you had before.

Third-
The 'New Horizons' by Mike Zisserson (mzisserson) use the ND105-4 with the Dayton ND16. If you want the ND105-4, build those.

If you want the M5n, you can build an adapted version of the 'Mn-14' that I posted above, as the tweeter model has been revamped.

If you want the B4n, use it for the 'OS's'; if you want the M4n, use it for the 'Sophomores'.

Later,
Wolf

[cckidd2]

Re: 2- Way Bookshelf

Thanks, you are so much help!

[Wolf]

Re: 2- Way Bookshelf

NP! I was once in your shoes.
Have fun!
Wolf

[cckidd2]

Re: 2- Way Bookshelf

I will! :D