Announcement

Collapse
No announcement yet.

My 'virtual walkaround' of MWAF/Dayton 2010...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ctbowman
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    I don't think so, Chad. I met you in 2007, and it's the only time I've met you.
    Oh well, I can still be the excuse....
    Wolf
    I thought I had seen you at one other Iowa event...

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    I don't think so, Chad. I met you in 2007, and it's the only time I've met you.
    Oh well, I can still be the excuse....
    Wolf

    Leave a comment:


  • ctbowman
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    OK- while I knew you were bulding those, that still doesn't explain why I'm your excuse...
    Care to enlighten me?
    Wolf
    Told the wife I had to build a pair using that driver after bringing them up in another thread and then saying I'd build a pair to bring when you had asked to hear them at the next event. She's met you at previous events and will expect to see you there.

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by ctbowman View Post
    AC130/50ck build.
    OK- while I knew you were bulding those, that still doesn't explain why I'm your excuse...
    Care to enlighten me?
    Wolf

    Leave a comment:


  • ctbowman
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    If you build what??

    I hope to be there. Being unemployed and not certain of another job by then means the UE could be about ready to recycle for another 6 months. I will try and stipulate that weekend for a couple days off in the terms of hiring if possible.
    Later,
    Wolf
    AC130/50ck build.

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    That is one of the reasons I went with the Usher, but it's NLA.

    If you wanted to make a grill, the pencil-holders for office-use from Wallie-World might work for you. Just cut them in half for a semi-cylindrical grille.
    Later,
    Wolf

    Leave a comment:


  • Paul Ebert
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Not to go too far adrift, but I wonder if Dayton might consider releasing an RS52F (soft dome version). My main issue with the other available mid domes is their lack of a metal grid protecting the dome.

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by ctbowman View Post
    If I build them you have to come. you can't back out.... your my excuse...
    If you build what??

    I hope to be there. Being unemployed and not certain of another job by then means the UE could be about ready to recycle for another 6 months. I will try and stipulate that weekend for a couple days off in the terms of hiring if possible.
    Later,
    Wolf

    Leave a comment:


  • ctbowman
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    I'm sure that was part of it.
    I look forward to another audition in Iowa, should I still be able to go.
    Later,
    Wolf
    If I build them you have to come. you can't back out.... your my excuse...

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Quando Omni Funkus Moritati (sp)....
    When all else fails, play dead....

    Good to know you appreciate good humor, Mike!
    ...and thank you again,
    Wolf

    Leave a comment:


  • Wolf
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    I hope so!
    Wolf

    Leave a comment:


  • mzisserson
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    Thanks, Mikey!
    Your NH really were nice! I thought there might be a small hole or dip between, but I was impressed. You even still managed to keep the midrange clear. Think I woulda bottom-vented for myself.
    Later,
    Wolf
    Thanks again Wolf. You will be hearing from me soon. You lit a fire again for me. I was getting into a funk. All the building and studying I have done a too few around to share it with here...

    I have the wife buying into the notion of me making the MWAF next year, so keep them fingers crossed!!! :D:D:D

    Leave a comment:


  • panomaniac
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    The mid I used is an Usher 9845, so not the Morel this time.
    Ah! My bad. Well it sounded great, whatever it was. Nice work.

    KYSOTI! (I am a card carrying member of the Possum Lodge, you know)

    Leave a comment:


  • MusicForMatt
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Originally posted by Wolf View Post
    I dunno, Rollie-
    That 'You stole my wife, you horsethief' track made up for it....
    Wolf
    My apologies, but we'll agree to disagree there! Definitely not to my tastes!! Riders in the Sky, if Google is any help. But then, not that there wasn't at least one instance that weekend that "my tastes" were called into question and made light of!

    "It's all good", though! If we all had the same likes and dislikes, it'd be pretty boring, and nobody wants that :eek:...

    Leave a comment:


  • MusicForMatt
    replied
    Re: My 'virtual walkaround' of MWAF/Dayton 2010...

    Wolf said: "The amp was a QSC GX3/5, and I don't recall the CD source..."

    It was a Denon professional unit of some type-- I didn't catch the model, though. Studio, DJ, or installation-style. One rack space, 1-disc. Similar to this:

    http://www.parts-express.com/pe/show...umber=245-3512

    Regarding the QSC GX series: First one I've seen in person, and I was pleased with the build quality-- especially for the asking price! Faultless sound to my ears, and, no amp clipping at THIS EVENT :D !

    Leave a comment:

Working...
X