Announcement

Collapse
No announcement yet.

Another request for LouC...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another request for LouC...

    Lou:

    My WT3 is on the fritz. I was wondering if you could possibly post the WT3 file for the Peerless 6-1/2 inch 4 Ohm ($10.00) woofer?

    Thank you,
    Leonard

  • #2
    Re: Another request for LouC...

    Lou, would you mind if i did a sketchup model/drawing of the LECBOS cabinet, I have lots of time and no money so it would give me something to do. I would not want to post anything out of bounds or step on any toes.

    Thanks
    THOMAS BROWN aka "STINKY"

    I've got an idea - an idea so smart that my head would explode if I even began to know what I'm talking about. - Peter Griffin

    I DON'T CARE WHAT KIND OF MUSIC YOU LISTEN TO, OR LIKE.
    SHUT UP, PUT DOWN THE WALLS OF PRETENSION FOR 1 SECOND AND JUST LISTEN TO THE SONGS
    - SCOTT IAN

    Comment


    • #3
      Re: Another request for LouC...

      Rogoll,

      I can send you the WT3 files for the four drivers I have when I get home tonight. PM me your e-mail.
      Craig

      I drive way too fast to worry about cholesterol.

      Comment


      • #4
        Re: Another request for LouC...

        As far as SketchUp goes, knock yourself out. The design is for all practical purposes free to regular guys. (If BOSE builds it, I'll hire a lawyer;) )

        Rogoll: It's easier to email those than to post them here. Be warned, I took my measurements in the box, with the port in place and both drivers wired in series.
        Lou's Speaker Site [speakers.lonesaguaro.com]
        "Different" is objective, "better" is subjective. Taste is not a provable fact.
        Where are you John Galt? I may not be worthy, but I'm ready.

        Comment


        • #5
          Re: Another request for LouC...

          Originally posted by LouC View Post
          As far as SketchUp goes, knock yourself out. The design is for all practical purposes free to regular guys. (If BOSE builds it, I'll hire a lawyer;) )

          Rogoll: It's easier to email those than to post them here. Be warned, I took my measurements in the box, with the port in place and both drivers wired in series.
          The tech talk team tweaked text attachment total size. (A little alliteration for ya :p)

          You should be able to post whole FRD and ZMA without a problem. Just add .TXT to the end of the file name.
          R = h/(2*pi*m*c) and don't you forget it! || Periodic Table as redrawn by Marshall Freerks and Ignatius Schumacher || King Crimson Radio
          Byzantium Project & Build Thread || MiniByzy Build Thread || 3 x Peerless 850439 HDS 3-way || 8" 2-way - RS28A/B&C8BG51

          95% of Climate Models Agree: The Observations Must be Wrong
          "Gravitational systems are the ashes of prior electrical systems.". - Hannes Alfven, Nobel Laureate, Plasma physicist.

          Comment


          • #6
            Re: Another request for LouC...

            Easier to do it once. I posted my measurement files on the LECBOS page

            Spl only goes down to 50 Hz. Files are for both driver, in series, measured from a single point.
            Lou's Speaker Site [speakers.lonesaguaro.com]
            "Different" is objective, "better" is subjective. Taste is not a provable fact.
            Where are you John Galt? I may not be worthy, but I'm ready.

            Comment


            • #7
              Re: Another request for LouC...

              Originally posted by LouC View Post
              (If BOSE builds it, I'll hire a lawyer;) )
              if bose builds any respectable speaker, i'll fly to the moon with no rocket ship :D

              Comment


              • #8
                Re: Another request for LouC...

                Originally posted by rogoll View Post
                Lou:

                My WT3 is on the fritz. I was wondering if you could possibly post the WT3 file for the Peerless 6-1/2 inch 4 Ohm ($10.00) woofer?

                Thank you,
                Leonard
                you don't happen to be using windows 7? i recently upgraded and found i had to set the input volume to '2' (of 100) for the line-in. it also defaulted to mono input instead of stereo. i saw lots of weird plots until i fixed thoser
                TM (RS125/TB25-302), TM RS150S / Vifa BC25SC06, RS150-4 / Vifa ML-TL, 3CR-AL Ultra Budget: Electric Blue TM, TMM, MTM, Dragonflies , Mounties: Mini HT Satellite,sub for minions

                Comment

                Working...
                X