The Speaker Building Bible

[[email protected]]

Re: The Speaker Building Bible - Thread opened for edits/input.

Updated.

[[email protected]]

Re: The Speaker Building Bible - Thread opened for edits/input.

Thanks JCC! I'll see what I can do in the morning.

[JCC]

Re: The Speaker Building Bible - Thread opened for edits/input.

One more thing: The link to optimizing crossovers to drivers gives a 404 error.

[JCC]

Re: The Speaker Building Bible - Thread opened for edits/input.

How about links to places with FRD and ZMA files for various drivers.

Here's one:

http://www.rjbaudio.com/Audiofiles/Driver%20FRD%20files.html

Here's another:

http://www.partsexpress.com/pdf/cliotxtfiles.zip

It would be great if PE would test all the drivers they sell and make the FRD and ZMA files available. (Even if PE limited availability of the files to people who bought the drivers from PE -- That would give PE a leg up on competitors.)

[[email protected]]

Re: The Speaker Building Bible - Thread opened for edits/input.

I'll take a look at it in the morning. Thanks for the heads-up!

[blank264]

Re: The Speaker Building Bible - Thread opened for edits/input.

Start to finish build thread for those starting out is giving a 404 error.

[BeerParty]

Re: The Speaker Building Bible - Thread opened for edits/input.

I am not familiar with MaxCut, but from a quick look at their web page it looks similar to Cut List, which I have used and like. Perhaps you could add a link for Cut List along side the MaxCut?

[[email protected]]

Re: The Speaker Building Bible - Thread opened for edits/input.

Recent updates have been added to include a link to HOLM, the guide from Ryan and rpb, and the wood board optimizer.

Any others?

[[email protected]]

Re: The Speaker Building Bible - Thread opened for edits/input.

I encourage any and all to link to this! Thanks, of course, for asking.

[Dr. K]

Re: The Speaker Building Bible - Thread opened for edits/input.

This is an amazingly helpful thread!

May I link to it from a post in my own DIY forum?

I've already put up a link to your fabulous webshop, of course! :D

[SteveB123]

Re: The Speaker Building Bible - Thread opened for edits/input.

Maybe a link to a cut list program, for under woodworking?

Such as http://maxcut.co.za/newversion/

[Wolf]

Re: Don't leave out the LDSG...

Has the link to this changed again?

From what I am told, this was a webpage maintained by Bob Stout, and he passed away in the not too distant past. I think it's completely gone now, and it was actually NLA about 2-3 weeks after I posted the updated webpage.

I have not regoogled to try and find it, but the wayback machine may be able to let you look at a lot of it.

Later,
Wolf

[frangus]

Re: Don't leave out the LDSG...

A valid resource!
You can spend hours in there....

http://ldsg.snippets.org/idx.php

I had to find the updated link. Apparently the older one expired.

Later,
Wolf

Has the link to this changed again?

[ryanbouma]

Re: The Speaker Building Bible - Thread opened for edits/input.

Thanks killa, but 95% of the work was rbp. Just wanna give credit where it's due.

[killa]

Re: The Speaker Building Bible - Thread opened for edits/input.

+1 needs to go under testing and measuring. Too much work went into it for it not to be included somewhere. Thanks again rpb and Ryan