Tweet
If I wanted to post some pictures of the progress of a project build, do they go here or in the gallery? I don't want to bind up anyone's shorts :p
-
Craig
I drive way too fast to worry about cholesterol. -
Re: Before I screw up....
Here...when it's finished post it in the gallery.Originally posted by PWR RYD View PostYour results may vary. -
Re: Before I screw up....
10-4Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Okay here we go. I bought the Peerless 6.5's this spring when the 835004 buyouts were the hot forum topic. Then I bought the Vifa tweeters after reading Lou's LECBOS build. So here are my pictures. I made some slight changes such as using 0.75" MDF, a 2.5" round front firing port, etc. These will be going out in my garage (on wall mounted) and my G-Dogs "Garage Dogs" will be gifted to a family member.
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
Craig
I drive way too fast to worry about cholesterol.Comment
-
Re: Before I screw up....
There's no such thing as having too many clamps.Originally posted by PWR RYD View Post
R = h/(2*pi*m*c) and don't you forget it! || Periodic Table as redrawn by Marshall Freerks and Ignatius Schumacher || King Crimson Radio
Byzantium Project & Build Thread || MiniByzy Build Thread || 3 x Peerless 850439 HDS 3-way || 8" 2-way - RS28A/B&C8BG51
95% of Climate Models Agree: The Observations Must be Wrong
"Gravitational systems are the ashes of prior electrical systems.". - Hannes Alfven, Nobel Laureate, Plasma physicist.Comment
-
Re: Before I screw up....
Someone needs to take the roundover bit away from you ;)Originally posted by PWR RYD View PostIsn't it about time we started answering rhetorical questions?
Paul Carmody's DIY Audio Projects
Twitter: @undefinition1Comment
-
Re: Before I screw up....
I was just thinking the same thing... The braces look so nice, a guy would almost hate to cover them upOriginally posted by Paul Carmody View Post
Don't listen to me - I have not sold any $150,000 speakers.Comment
-
Re: Before I screw up....
Craig,
looking good as usual, keep it up.
TimComment
Comment