Cabinet / Baffle CNC Service

[spasticteapot]

Re: Cabinet / Baffle CNC Service

Does this price include roundovers?

[[email protected]]

Re: Cabinet / Baffle CNC Service

so, if you can draw it, you can cut it? those braces are wicked.

[Erich H]

Re: Cabinet / Baffle CNC Service

Dave, I have something you might be interested in, I'll contact you with more information.

[NateTTU]

Re: Cabinet / Baffle CNC Service

Thanks for offering your services and at very nice prices, but I bet you are going to get swamped with orders soon.

I think having access to a CNC could open up a lot of possibilites, but I'm interested a little more in templates and not actual enclosures. I still have fun building cabinets, but could use some templates for trying to create curved cabinets.

Curious if you by chance can cut something other than mdf? Maybe a hardwood that might hold up as a template a little better than mdf. I'm assuming you have pretty decent CAD skills to input those models to cut so creating a curved template would be pretty easy?

[Dave_W]

Re: Cabinet / Baffle CNC Service

Something I'm getting ready to cut in the next couple of weeks for myself. It's a ported enclosure for an RSS390HF-4 and a Bash 500w plate amp. Interior volume is in the neighborhood 5.5cu.ft. The port is 5" PVC approximately 30" long.

The rear shows a 3" thick stack of MDF that is machined into a port flare. I'll post actual pictures and a video once it's finished.

[lunchmoney]

Re: Cabinet / Baffle CNC Service

I'd imagine Dave isn't trying to recover the cost of his CNC machine, and he's not paying union carpentry wages. More than likely he's got a day job, probably in some sort of engineering.

Yeah, makes sense.

I hope my post didn't come across the wrong way.

It's very kind of him to be offering for such low prices, a great thing for the DIY community.

[Dave_W]

Re: Cabinet / Baffle CNC Service

The baffles would be $33 for the pair. Approximate weight is 9lbs each.

It would probably be best to leave them slightly over sized (1/16") so you can route them flush to the top and sides of your cabinet.

-Dave

Dave_W, are you willing to make tower speakers for Zaph's BAMTM? Actually, I'm nmore interested in the baffles. I have all the tools, I just hate routing holes in the middle of Iowa winters in an unheated garage.

http://www.zaphaudio.com/BAMTM-cad-vented.pdf

Thanks!

[Taterworks]

Re: Cabinet / Baffle CNC Service

How are you able to do it so cheaply?

I know I can't compete with a cnc machine, but even so that's just giving them away.

I'd imagine Dave isn't trying to recover the cost of his CNC machine, and he's not paying union carpentry wages. More than likely he's got a day job, probably in some sort of engineering.

[deewan]

Re: Cabinet / Baffle CNC Service

Dave_W, are you willing to make tower speakers for Zaph's BAMTM? Actually, I'm nmore interested in the baffles. I have all the tools, I just hate routing holes in the middle of Iowa winters in an unheated garage.

http://www.zaphaudio.com/BAMTM-cad-vented.pdf

Thanks!

[lunchmoney]

Re: Cabinet / Baffle CNC Service

The Nano Neo's would be $55 for the pair plus shipping.

WOW, that is just insanely cheap.

It sure kills my endeavor.

How are you able to do it so cheaply?

I know I can't compete with a cnc machine, but even so that's just giving them away.

A while back I had a cnc shop quote a pair of baffles (just the baffles!) and it was nearly $200

[ligs]

Re: Cabinet / Baffle CNC Service

Cuyahoga Falls, OH 44223

Great location. I assume I can just drive up to pick my project up? I live in Solon, Ohio.

[Dave_W]

Re: Cabinet / Baffle CNC Service

Could you post approximate weights?

How about the Nano Neo?

The Nano Neo's would be $55 for the pair plus shipping.

The approximate weight would be 13lbs each. That is just a rough guess based on the density of MDF and the size of the panels.

The OS MTM's would be ~14lbs each
The OS's would be ~7-8bs each
The ZA5.2's would be ~12lbs each

-Dave

[greywarden]

Re: Cabinet / Baffle CNC Service

Could you post approximate weights?

How about the Nano Neo?

[killersoundz]

Re: Cabinet / Baffle CNC Service

Dave I'm just a stones throw from you in Canton, let me know if you need any help anytime, I'm good affordable labor. I may also require your services for some of my projects in the future. Would you mind messaging me your phone number to put in my rolodex? Nice to find someone locally with a CNC router table. I'm set on building my own in the next year or two.

[Dave_W]

Re: Cabinet / Baffle CNC Service

Cuyahoga Falls, OH 44223

Where are you located?