Buyout Transducers

[1100xxben]

Re: Buyout Transducers

Turns out that the last order of Polyswitches I got from Erse were the exact same part (WH 60 65).

By the way, if you would rather use fuses to protect your drivers. I believe the formula is A = SQRT(P*Z), where A = ampacity of fuse, P = wattage of driver, and Z = driver impedence. This is as best as I can recall from an old speaker building book.

Close, I = SQRT(P/Z) (where I = current rating of fuse).