Announcement

Collapse
No announcement yet.

New pics of my 3-way *PIC*

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New pics of my 3-way *PIC*




    Well, I finely got around to getting the veneer and the Paduk bafle of tonight. Just need to finish sanding them. Not too sure how i'll do the final finish on them. a clear coat of some sort. That or a few coats of sealer, and a week of sitting around rubbing a wax finish on.
    Sorry for the poor image quality, The Paduk is actualy a lot deeper in colour than what it shows in the picture.

    Rene

  • #2
    Re: New pics of my 3-way *PIC*




    > Well, I finely got around to getting the
    > veneer and the Paduk bafle of tonight. Just
    > need to finish sanding them. Not too sure
    > how i'll do the final finish on them. a
    > clear coat of some sort. That or a few coats
    > of sealer, and a week of sitting around
    > rubbing a wax finish on.
    > Sorry for the poor image quality, The Paduk
    > is actualy a lot deeper in colour than what
    > it shows in the picture.

    > Rene

    Rene,

    I used natural Watco on my padauk. The pic below is how mine looks. When applying the Watco I saturate the piece then wet sand it with 400 grit. It comes real smooth - just like a baby's butt.

    -Ken

    Comment


    • #3
      Go

      ________
      LIVE ***
      Last edited by thenoid; 08-31-2011, 12:03 PM.

      Comment


      • #4
        Re: Awesome Speakers folks...double !!! B-O-I-N-G *PIC*




        here's a better shot of the front for you.

        Comment


        • #5
          Re: New pics of my 3-way *PIC*




          the wax finish I did on these turned out nice. But it takes a hell of a lot of work to get it looking like this.

          Rene

          > I used natural Watco on my padauk. The pic
          > below is how mine looks. When applying the
          > Watco I saturate the piece then wet sand it
          > with 400 grit. It comes real smooth - just
          > like a baby's butt.

          > -Ken

          Comment


          • #6
            Re: New pics of my 3-way


            Very nice....

            I have the same tablesaw BTW.

            > Well, I finely got around to getting the
            > veneer and the Paduk bafle of tonight. Just
            > need to finish sanding them. Not too sure
            > how i'll do the final finish on them. a
            > clear coat of some sort. That or a few coats
            > of sealer, and a week of sitting around
            > rubbing a wax finish on.
            > Sorry for the poor image quality, The Paduk
            > is actualy a lot deeper in colour than what
            > it shows in the picture.

            > Rene

            Comment


            • #7
              Re: New pics of my 3-way


              Not too shabby of a table saw, the guide fence is a little on the poor side, but I just screw a length of MDF to it and it works fine.

              Rene

              > Very nice....

              > I have the same tablesaw BTW.

              Comment


              • #8
                Re: New pics of my 3-way


                Yeah, the guide fence definately isn't the greatest but it's a great novice saw.

                > Not too shabby of a table saw, the guide
                > fence is a little on the poor side, but I
                > just screw a length of MDF to it and it
                > works fine.

                > Rene

                Comment


                • #9
                  Re: New pics of my 3-way


                  > the wax finish I did on these turned out
                  > nice. But it takes a hell of a lot of work
                  > to get it looking like this.

                  > Rene

                  That's why I use the Watco - not so much work involved. I also think oil finishes bring out more depth of the wood, plus I think it seals the grain better than wax alone. I've been using Watco for years. You can put wax over Watco after it has dried.

                  -Ken

                  Comment

                  Working...
                  X